Key stuck in Ignition or stuck in park

Luxury at its finest with the pleasure of off Road
Post Reply
User avatar
whitehumh2
CHC Trail SuperGuide
Posts: 4529
Joined: Tue Jul 04, 2006 11:47 pm
Location: Lachine, Quebec

Key stuck in Ignition or stuck in park

Post by whitehumh2 »

I recently had this happen to me, so here is what I did! The info is from FlashOffroad and the pics are really good. However I did not have to drill any hole as I have the updated steering column lower cover that has a built-in access hole. Also I extended all the wires at the base of the shifter not just the one that was broken and I covered it will a heavy gauge wire loom to protect it from any further problems and now I have no more headaches!!!



http://www.flashoffroad.com/H2/maintena ... blems.html
<p class="bbc_center">1 - There is a time for everything,

and a season for every activity under the heavens:

3b - a time to tear down and a time to build,

5 - a time to scatter stones and a time to gather them,

Ecclesiastes 3:1,3b&5a
User avatar
normsadler
CHC Pilot
Posts: 379
Joined: Sun Feb 07, 2010 9:14 am
Location: London, ON

Re: Key stuck in Ignition or stuck in park

Post by normsadler »

Very interesting. I've had a number of times when the key can't be removed. Usually by knocking either the steering column or gear shifter it finally turns and comes out. The screws in the centre console have already been removed before I bought it, I though maybe border security had ripped it apart ... maybe not! Every time I take the truck into the shop, the battery goes dead. I just thought it was them playing the radio or leaving the doors open... Maybe not.

Would you replace the ignition and inspect the shifter wires? Or do you think it would just be the shifter wires?
Norm & Sue
2004 Pewter H2 (with a splash)
2010 White H3T (sold)

I'm not stuck, I'm momentarily inconvenienced.
User avatar
whitehumh2
CHC Trail SuperGuide
Posts: 4529
Joined: Tue Jul 04, 2006 11:47 pm
Location: Lachine, Quebec

Re: Key stuck in Ignition or stuck in park

Post by whitehumh2 »

Norm, if you have a phillips screw driver and about 1 hr you can fix it yourself! I can almost guarantee that it is the red wire that has broken 85% of the way thru and that is why sometimes it does it and sometimes it doesn't...just depends on the position of the wire! You would save yourself a ton of cash and frustration by doing it yourself!



Kev
<p class="bbc_center">1 - There is a time for everything,

and a season for every activity under the heavens:

3b - a time to tear down and a time to build,

5 - a time to scatter stones and a time to gather them,

Ecclesiastes 3:1,3b&5a
User avatar
kevin
CHC Pilot
Posts: 102
Joined: Wed Feb 10, 2010 12:08 pm
Location: amherst,n.s.

Re: Key stuck in Ignition or stuck in park

Post by kevin »

Just had this happen to me. My key would not turn back to turn off inside controlls or let the key come out. Took the shifter apart and found the yellow wire broke going to the shifter. It looked like a clean cut
2007 H2 Black
Post Reply