Ok, so I was driving with the A/C on and all of the sudden it stopped blowing. I tried turning on the heat, defroster, everything and it doesn't blow any air out. I didn't hear any strange sounds when it happened or as we speak. I am curious to know if it might be a belt, fuse, or...
Any help would be appreciated!
Air Problems
-
vhukasa
- Club Member
- Posts: 14
- Joined: Wed May 04, 2011 11:40 pm
- Contact:
-
dwaxman1
- CHC Trail Guide
- Posts: 957
- Joined: Wed Dec 09, 2009 6:20 pm
- Location: , Ontario
Re: Air Problems
Probably your belt tensioner, check to see if there is a belt hanging below, you should have two belts in your truck, the AC belt tensioner is a common fault..it is front of engine, on the bottom passenger side.. Norm, TTanky" just replaced his, I replaced mine on my H2 last year..
<!-- isHtml:1 --><!-- isHtml:1 -->
-
MasterMechanic
- Club Member
- Posts: 45
- Joined: Tue Mar 15, 2011 8:59 am
- Location: Brampton
Re: Air Problems
i am willing to bet the blower motor wiring is burnt at the resistor. VERY VERY VERY common problem with the H3. the wiring and the resistor need to be replaced. cheers.
<p class="bbc_center">
-
black rhino
- CHC Navigator
- Posts: 93
- Joined: Sun Jan 24, 2010 10:32 pm
- Contact:
Re: Air Problems
I had the resistor go in the 08 h3 no blowwer motor
-
shotgun-cam
- CHC Trail SuperGuide
- Posts: 2037
- Joined: Sun Jan 24, 2010 2:09 pm
Re: Air Problems
Kevin forgot Resistor burnt out wiring and caused the entire control and wiring harness to be replaced.
Enjoy Life and Leave the World a Little Better Each Day!!