H3 PCV valve - Where is it?

Have a technical question about your ride, or just looking for help? This is the spot..members unite to assist each other.
Technical help available in Alpha section
Post Reply
User avatar
SELWA
CHC Pilot
Posts: 284
Joined: Tue May 29, 2007 6:01 pm
Location: Milton,Ontario

H3 PCV valve - Where is it?

Post by SELWA »

I removed the air cover above the engine and tried to find it the other day and have no idea.
1995 H1 Wagon SOLD!

2007 H3
User avatar
johnnyspikesH3
CHC Trail Guide
Posts: 671
Joined: Thu Mar 17, 2011 4:41 pm
Location: MISSISSAUGA ,ONTARIO

Re: H3 PCV valve - Where is it?

Post by johnnyspikesH3 »

[quote name='SELWA' timestamp='1320054345' post='31976']

I removed the air cover above the engine and tried to find it the other day and have no idea.

[/quote]

If i am currect ? Our trucks don't have a PCV valve, just an oil spray baffle inside the valve cover with a vent to the air intake resonator box through a rubber hose. What year and engine do you have ? Is it running ruff our off ? Or are you just doing routine maintenance .
Last edited by johnnyspikesH3 on Mon Oct 31, 2011 8:17 pm, edited 1 time in total.
<p>2014 JKU SAHARA , 3.6L AUTO ,4 INCH PRO COMP STAGE ONE WITH MX6 SHOCKS AND PC DUAL STABILIZERS, PRO COMP ADJUSTABLE TRACK BAR,RUBICON EXPRESS DROP CONTROL ARM BRACKETS 35.12.50-17 FIERCE ATTITUDE, 17x9 PRO COMP 7031 WHEELS,KC 6 INCH AND 5 INCH LIGHTS AND BRACKETS, WARRIOR REAR TIRE SPACER , SMITTYBILT SEAT COVERS. ROUGH COUNTRY STUBBY BUMPER , SMITTYBILT 10,000LB X20 WINCH, COAST FRONT DRIVE-SHAFT, DYNOMAX CAT BACK EXHAUST
User avatar
SELWA
CHC Pilot
Posts: 284
Joined: Tue May 29, 2007 6:01 pm
Location: Milton,Ontario

Re: H3 PCV valve - Where is it?

Post by SELWA »

[quote name='johnnyspikesH3' timestamp='1320094359' post='31988']

If i am currect ? Our trucks don't have a PCV valve, just an oil spray baffle inside the valve cover with a vent to the air intake resonator box through a rubber hose. What year and engine do you have ? Is it running ruff our off ? Or are you just doing routine maintenance .

[/quote]



Funny how CTC was able to get me a part number anbd order it in! $5 so no big deal, I cleaned up my throttle body and it seemed to help my issue.



This is what was happening:



Drives fine, and at full stop the idle was fine, but right before I stop the idle would SOMETIMES idle close to 500rpms and a few times it stalled. This happens more when it's colder. If I tapped the gas it went back up. Very strange!
1995 H1 Wagon SOLD!

2007 H3
User avatar
johnnyspikesH3
CHC Trail Guide
Posts: 671
Joined: Thu Mar 17, 2011 4:41 pm
Location: MISSISSAUGA ,ONTARIO

Re: H3 PCV valve - Where is it?

Post by johnnyspikesH3 »

[quote name='SELWA' timestamp='1320195019' post='32066']

Funny how CTC was able to get me a part number anbd order it in! $5 so no big deal, I cleaned up my throttle body and it seemed to help my issue.



This is what was happening:



Drives fine, and at full stop the idle was fine, but right before I stop the idle would SOMETIMES idle close to 500rpms and a few times it stalled. This happens more when it's colder. If I tapped the gas it went back up. Very strange!

[/quote]

Well you said you cleaned your throttle body . Injectors also ? How old are your plugs ? Yes that is low, and stalling is VERY UNCOOL . I hope your head is not going ? What year and engine to you have . What is the mileage on your H3 ? Are you in Ontario ?
<p>2014 JKU SAHARA , 3.6L AUTO ,4 INCH PRO COMP STAGE ONE WITH MX6 SHOCKS AND PC DUAL STABILIZERS, PRO COMP ADJUSTABLE TRACK BAR,RUBICON EXPRESS DROP CONTROL ARM BRACKETS 35.12.50-17 FIERCE ATTITUDE, 17x9 PRO COMP 7031 WHEELS,KC 6 INCH AND 5 INCH LIGHTS AND BRACKETS, WARRIOR REAR TIRE SPACER , SMITTYBILT SEAT COVERS. ROUGH COUNTRY STUBBY BUMPER , SMITTYBILT 10,000LB X20 WINCH, COAST FRONT DRIVE-SHAFT, DYNOMAX CAT BACK EXHAUST
User avatar
SELWA
CHC Pilot
Posts: 284
Joined: Tue May 29, 2007 6:01 pm
Location: Milton,Ontario

Re: H3 PCV valve - Where is it?

Post by SELWA »

[quote name='johnnyspikesH3' timestamp='1320203853' post='32093']

Well you said you cleaned your throttle body . Injectors also ? How old are your plugs ? Yes that is low, and stalling is VERY UNCOOL . I hope your head is not going ? What year and engine to you have . What is the mileage on your H3 ? Are you in Ontario ?

[/quote]



I cleaned just the visible throttle body. Having 4 kids leaves me with little time to wrench too much. It's a 07 with 140K on it. During the spring and summer I had no issues at all, just when it's colder out. However after the cleaning I've had the symptoms mentioned go away! I'm right beside you in Milton! <img src='http://www.canadianhummerclub.com/forum ... rgreen.gif' class='bbc_emoticon' alt=':mrgreen:' />
1995 H1 Wagon SOLD!

2007 H3
User avatar
SELWA
CHC Pilot
Posts: 284
Joined: Tue May 29, 2007 6:01 pm
Location: Milton,Ontario

Re: H3 PCV valve - Where is it?

Post by SELWA »

[quote name='johnnyspikesH3' timestamp='1320203853' post='32093']

Well you said you cleaned your throttle body . Injectors also ? How old are your plugs ? Yes that is low, and stalling is VERY UNCOOL . I hope your head is not going ? What year and engine to you have . What is the mileage on your H3 ? Are you in Ontario ?

[/quote]



I just cleaned the visible throttle body. Having 4 kids leaves me with little time to wrench too much. It's a 07 with 140K on it. During the spring and summer I had no issues at all, just when it's colder out. However after the cleaning I've had the symptoms mentioned go away! I'm right beside you in Milton! <img src='http://www.canadianhummerclub.com/forum ... rgreen.gif' class='bbc_emoticon' alt=':mrgreen:' />
Last edited by SELWA on Wed Nov 02, 2011 8:06 pm, edited 1 time in total.
1995 H1 Wagon SOLD!

2007 H3
Post Reply