Anybody had this done ? I think i might get it done .
-
johnnyspikesH3
- CHC Trail Guide
- Posts: 671
- Joined: Thu Mar 17, 2011 4:41 pm
- Location: MISSISSAUGA ,ONTARIO
Anybody had this done ? I think i might get it done .
Nice little bling accent . If any of you are able ( Have the machinery and tools ) ARE WILLING TO DO THIS . PLEASE LET ME KNOW . http://www.youtube.com/watch?feature=pl ... j0inunMkB8
Last edited by johnnyspikesH3 on Sun Dec 18, 2011 1:15 pm, edited 1 time in total.
<p>2014 JKU SAHARA , 3.6L AUTO ,4 INCH PRO COMP STAGE ONE WITH MX6 SHOCKS AND PC DUAL STABILIZERS, PRO COMP ADJUSTABLE TRACK BAR,RUBICON EXPRESS DROP CONTROL ARM BRACKETS 35.12.50-17 FIERCE ATTITUDE, 17x9 PRO COMP 7031 WHEELS,KC 6 INCH AND 5 INCH LIGHTS AND BRACKETS, WARRIOR REAR TIRE SPACER , SMITTYBILT SEAT COVERS. ROUGH COUNTRY STUBBY BUMPER , SMITTYBILT 10,000LB X20 WINCH, COAST FRONT DRIVE-SHAFT, DYNOMAX CAT BACK EXHAUST
-
Indy
- CHC Pilot
- Posts: 123
- Joined: Tue Feb 08, 2011 3:28 pm
Re: Anybody had this done ? I think i might get it done .
I have seen this video before....I am amazed at how shiny aluminum can get if polished. But it does seem a lot of work and personally I would never add bling to a Hummer, but that is just my taste. If you like it, I am sure it can be done with a hand held polishing tool (I believe there are some add-ons you can buy for angle grinders, which might work along with a good polishing paste).
Ferrari Mondial 3.2 Cabriolet
Jeep Grand Cherokee 5.7 Hemi
---------------------------------------------------------------------------------------------------------------------------
99 HUMMER H1 HMCS / bright white / P400 6.5TD / heavily modded - sold
VIPER RT10 GenII / silver - graphite stripes - sold
FJ Cruiser / sun fusion yellow / "C" package- sold
HUMMER H2 / yellow / Adv. package / 4" lift / 37" STT - sold
Plymouth P R O W L E R / red - sold
Corvette C5 / Millennium Yellow / 6M - sold
Corvette C5 / Nassau Blue / 6M - sold
J E E P ZJ / 7" lift / white / 35" Cooper STT - sold
J E E P TJ / 7" lift /chillipepper red / 37" MTR - sold
Mustang GT 4.6 / black / 5M - sold
Jeep Grand Cherokee 5.7 Hemi
---------------------------------------------------------------------------------------------------------------------------
99 HUMMER H1 HMCS / bright white / P400 6.5TD / heavily modded - sold
VIPER RT10 GenII / silver - graphite stripes - sold
FJ Cruiser / sun fusion yellow / "C" package- sold
HUMMER H2 / yellow / Adv. package / 4" lift / 37" STT - sold
Plymouth P R O W L E R / red - sold
Corvette C5 / Millennium Yellow / 6M - sold
Corvette C5 / Nassau Blue / 6M - sold
J E E P ZJ / 7" lift / white / 35" Cooper STT - sold
J E E P TJ / 7" lift /chillipepper red / 37" MTR - sold
Mustang GT 4.6 / black / 5M - sold
-
thedub
- CHC Pilot
- Posts: 412
- Joined: Fri Aug 26, 2011 6:57 pm
- Location: Edmonton Ab
Re: Anybody had this done ? I think i might get it done .
doing it is not to hard, you can get the disk mount for any grinder with socks to put on it.
The problem is that you may get a week or month because it will oxidize and you have to do it again; its more trouble than its worth for where it sits on the truck.
and FYI; if anyone is going to try do it and has never done it before, then DO NOT use the grinder for more than 10-12 minutes at a time and leave a big break between. the micro vibrations will cause "white knuckle" or "dead finger"
your fingers go white because of the vibration damageing the nerves and blood vessels.
it your lucky it hurts like hell (really - as in dear god shoot me now! - bad pins and needles) if you do cause severe damage you sure as shit wont be playing the piano.... ever, and Aluminum dust will give you a sever sore throat and prolonged exposure causes leukemia.
Well arnt I just a little ray of sunshine <img src='http://www.canadianhummerclub.com/forum ... adbang.gif' class='bbc_emoticon' alt=':headbang:' />
The problem is that you may get a week or month because it will oxidize and you have to do it again; its more trouble than its worth for where it sits on the truck.
and FYI; if anyone is going to try do it and has never done it before, then DO NOT use the grinder for more than 10-12 minutes at a time and leave a big break between. the micro vibrations will cause "white knuckle" or "dead finger"
your fingers go white because of the vibration damageing the nerves and blood vessels.
it your lucky it hurts like hell (really - as in dear god shoot me now! - bad pins and needles) if you do cause severe damage you sure as shit wont be playing the piano.... ever, and Aluminum dust will give you a sever sore throat and prolonged exposure causes leukemia.
Well arnt I just a little ray of sunshine <img src='http://www.canadianhummerclub.com/forum ... adbang.gif' class='bbc_emoticon' alt=':headbang:' />
[center]Yellow H2
Mississauga, Ontario.
Just because I drive a HUMMER don't mean I don't care about the planet.... in fact it means I can get to most parts without any help!
(try that in your prius)[/center]
Mississauga, Ontario.
Just because I drive a HUMMER don't mean I don't care about the planet.... in fact it means I can get to most parts without any help!
(try that in your prius)[/center]
-
johnnyspikesH3
- CHC Trail Guide
- Posts: 671
- Joined: Thu Mar 17, 2011 4:41 pm
- Location: MISSISSAUGA ,ONTARIO
Re: Anybody had this done ? I think i might get it done .
Thanks guys for the input . I mainly liked the one that was painted black and had the 2 polished . Thanks again for the input .
<p>2014 JKU SAHARA , 3.6L AUTO ,4 INCH PRO COMP STAGE ONE WITH MX6 SHOCKS AND PC DUAL STABILIZERS, PRO COMP ADJUSTABLE TRACK BAR,RUBICON EXPRESS DROP CONTROL ARM BRACKETS 35.12.50-17 FIERCE ATTITUDE, 17x9 PRO COMP 7031 WHEELS,KC 6 INCH AND 5 INCH LIGHTS AND BRACKETS, WARRIOR REAR TIRE SPACER , SMITTYBILT SEAT COVERS. ROUGH COUNTRY STUBBY BUMPER , SMITTYBILT 10,000LB X20 WINCH, COAST FRONT DRIVE-SHAFT, DYNOMAX CAT BACK EXHAUST
-
shotgun-cam
- CHC Trail SuperGuide
- Posts: 2037
- Joined: Sun Jan 24, 2010 2:09 pm
Re: Anybody had this done ? I think i might get it done .
Used to make aluminum electronic chasis. We would chuck steel wool in drill press and make circular spin patterns on aluminum.
Enjoy Life and Leave the World a Little Better Each Day!!
-
dwaxman1
- CHC Trail Guide
- Posts: 957
- Joined: Wed Dec 09, 2009 6:20 pm
- Location: , Ontario
Re: Anybody had this done ? I think i might get it done .
too much bling for me.. my skid plate was replaced long ago with a custom setup.....
<!-- isHtml:1 --><!-- isHtml:1 -->