Hummer H1 rims on Hummer H2

[vittorioh2]

Hi someone knows if the Hummer H1 rims fit on a Hummer H2 (eventually I have spacers 1,5)

Regards



Vittorio (from Italy)



Ps I'm looking for 4-5 H1 rims 16,5 also not original

[thedub]

You need to talk to Heavyde <img src='http://www.canadianhummerclub.com/forum ... ght_on.gif' class='bbc_emoticon' alt=':right_on:' />

[Indy]

They have the same bolt pattern, but the selection of 16.5" tires is very scarce. I'd rather go with aftermarket wheels if I were you.

ciao <img src='http://www.canadianhummerclub.com/forum ... n_cool.gif' class='bbc_emoticon' alt='' />

[whitehumh2]

I really don't think you can run either the steel or the aluminum H1 rims on an H2. While they have the same bolt pattern, the center is larger on a H1 rim than on a H2 rim, that means the wheel studs would have to support all the weight...which is not what they were designed to do!

Secondly the 16.5" rims will be too close to the brake calipers and the 17" rims the bolts are inside so again stick with the H2 rims!



You can put H2 rims on an H1, but not the opposite way!

[dwaxman1]

[quote name='Polar Bear' timestamp='1324295565' post='33682']

I really don't think you can run either the steel or the aluminum H1 rims on an H2. While they have the same bolt pattern, the center is larger on a H1 rim than on a H2 rim, that means the wheel studs would have to support all the weight...which is not what they were designed to do!

Secondly the 16.5" rims will be too close to the brake calipers and the 17" rims the bolts are inside so again stick with the H2 rims!



You can put H2 rims on an H1, but not the opposite way!

[/quote]



but Kevin, to pout H2 on H1 you need to bore the center of the H2 rim out a bit to make it fit...



And I agree, H1 on H2 is a bad idea....