PMT Fabrication Trailing Arms

Luxury at its finest with the pleasure of off Road
Post Reply
User avatar
whitehumh2
CHC Trail SuperGuide
Posts: 4529
Joined: Tue Jul 04, 2006 11:47 pm
Location: Lachine, Quebec

PMT Fabrication Trailing Arms

Post by whitehumh2 »

So lately I have noticed that my H2 has had an odd sway under acceleration and in some turns. Upon closer inspection I found that my Edelbrock Trailing arms had severely worn in the pivots and were allowing excess play. So seeing as these only lasted 3 years, I was not going to install another set. So I began my research and came across these from PMT Fabrication http://pmtfabrication.com/Products/72-rock-crawler-4x4-custom-length-adjustable-control-arms.aspx



Here are the pics of my install;



So here they are when I received them...aren't they beefy!


DSCN3475.JPG

DSCN3476.JPG


Here are my crap Edelbrock arms that need to be replaced!


DSCN3477.JPG

DSCN3478.JPG


Here is the first one installed


DSCN3479.JPG

DSCN3481.JPG

DSCN3482.JPG

DSCN3483.JPG


The other side is exactly the same except you need to remove the gas tank skid plate to get access to remove the front bolt.

These new arms are fully adjustable and greaseable and hopefully should last forever!



Today I roadtested my H2 and man what a difference! My H2 is so solid and I find the ride better than ever! I think all you H2 guys order up a pair for your Hummers too!



Oh and you can get them powdercoated in whatever color you want...Cool Huh!



Btw, with the front Heim Joint, rear axle flex should be better than ever...update on that part soon!



See you on the trails!
You do not have the required permissions to view the files attached to this post.
<p class="bbc_center">1 - There is a time for everything,

and a season for every activity under the heavens:

3b - a time to tear down and a time to build,

5 - a time to scatter stones and a time to gather them,

Ecclesiastes 3:1,3b&5a
Top
User avatar
johnnyspikesH3
CHC Trail Guide
Posts: 671
Joined: Thu Mar 17, 2011 4:41 pm
Location: MISSISSAUGA ,ONTARIO

Re: PMT Fabrication Trailing Arms

Post by johnnyspikesH3 »

Some one is HAPPY HAPPY HAPPY .
<p>2014 JKU SAHARA , 3.6L AUTO ,4 INCH PRO COMP STAGE ONE WITH MX6 SHOCKS AND PC DUAL STABILIZERS, PRO COMP ADJUSTABLE TRACK BAR,RUBICON EXPRESS DROP CONTROL ARM BRACKETS 35.12.50-17 FIERCE ATTITUDE, 17x9 PRO COMP 7031 WHEELS,KC 6 INCH AND 5 INCH LIGHTS AND BRACKETS, WARRIOR REAR TIRE SPACER , SMITTYBILT SEAT COVERS. ROUGH COUNTRY STUBBY BUMPER , SMITTYBILT 10,000LB X20 WINCH, COAST FRONT DRIVE-SHAFT, DYNOMAX CAT BACK EXHAUST
Top
User avatar
citiboy
CHC Trail Guide
Posts: 576
Joined: Fri Feb 05, 2010 8:07 am
Location: Delson, Quebec

Re: PMT Fabrication Trailing Arms

Post by citiboy »

Cool upgrades....the only thing i don't like is the grease fittings....can you replace them with flush mount type so it's not prone to rock damage.
<p class="bbc_center">2008 Hummer H2 Luxury Edition
<div> </div>
<div>Toyo MT 38x13.50x18 on Rockstar. Green keys. 2" rear spacers. 1" bodylift. Cognito UCA, steering bracket, front stab links. Bilstein 5100 shocks. Moog inner/outer tie-rods, pitman, idler arm & bracket with remote zerk. E&G Classics fender flares. ARP 434-1301 ex. man. stud kit. Airaid perf. air filter. Crown Performance brake lines. Warn PowerPlant HD. Rubberduck UCP. Gobi Ranger Roof Rack. Morimoto FX-R 3.0 projector headlights with 55w AC HID kit. Hella Rallye 4000 aux lights. Evans waterless coolant.</div>
 
<p class="bbc_center"><a class="bbc_url" href="http://www.youtube.com/watch?v=HHPamkrWbiY">Off-Road Videos</a>
Top
User avatar
Roy
CHC Trail SuperGuide
Posts: 1933
Joined: Tue Dec 29, 2009 8:21 pm
Location: Stratford,Ontario

Re: PMT Fabrication Trailing Arms

Post by Roy »

put the nipples up top, still greasable but safer
                                      99 Wagon
                          5.9 Cummins 12 valve  mech.                                     Stocking most parts to fix your H1  :smil9:
                                   41.5-13.5 R16.5 Pitbull Rockers,
                                     Auburn lockers front and rear
                                  Full custom underbody protection
                                                3" body lift
                                          4" side rock tubes                                 
                               12100 rear cv shafts                                                                        
 
 
 
 
519-272-1761   :cellphone:
<p style="text-align:center;"> 
Top
User avatar
normsadler
CHC Pilot
Posts: 379
Joined: Sun Feb 07, 2010 9:14 am
Location: London, ON

Re: PMT Fabrication Trailing Arms

Post by normsadler »

I agree, put those nipples up. Oh that sounds dirty! Those look like a nice upgrade!
Norm & Sue
2004 Pewter H2 (with a splash)
2010 White H3T (sold)

I'm not stuck, I'm momentarily inconvenienced.
Top
User avatar
whitehumh2
CHC Trail SuperGuide
Posts: 4529
Joined: Tue Jul 04, 2006 11:47 pm
Location: Lachine, Quebec

Re: PMT Fabrication Trailing Arms

Post by whitehumh2 »

On the previous arms that where installed I had the grease fittings protected so well that mud and water would sit in them. I am going to try them like this simply because it will be easier to grease them and no crap can get in them. If I see that I shear them off, then I will recess them with a welded protective tube around them...but I really intend to keep them facing down!
<p class="bbc_center">1 - There is a time for everything,

and a season for every activity under the heavens:

3b - a time to tear down and a time to build,

5 - a time to scatter stones and a time to gather them,

Ecclesiastes 3:1,3b&5a
Top
Post Reply

Return to “Hummer H2 and H2 SUT”