arb Snorkle for h3

[T.C.]

i have 75 Snorkle for h3 to move ...need one let me know

[dwaxman1]

[quote name='CABOOSE' date='29 January 2010 - 09:05 PM' timestamp='1264817114' post='354']

i have 75 Snorkle for h3 to move ...need one let me know

[/quote]





post a photo Tony!

[T.C.]

The Safari snorkel system for the popular H3 Hummer is tough and stylish and has been designed to deliver a huge volume of the coolest and cleanest air possible into the stock air cleaner assembly.

With the variety of engine enhancements that this vehicle will invariably receive by dedicated enthusiasts, Safari took the decision to design a snorkel system that not only exceeded the air flow requirements of the stock engine configuration, but also satisfied the mass air flow demands of modified engines that produce greater than stock horsepower.

h3_detail2.jpg

Close attention to the internal cross sectional profile and area, air velocity and flow path through each and every point along the entire length of the snorkel system ensures that the greatest air flow is achieved.



Huge air flow is but one aspect of the ultimate in snorkel design. The Safari air ram is designed to perform two very important roles. The most obvious is to funnel cool clean air into the snorkel body - but just as importantly, the Safari air ram acts as a highly efficient water separator to remove rain water from the incoming air stream - thus ensuring safe engine operation through even the most torrential tropical storms.



In addition, the detachable Safari air ram can be rotated to any position. This means great peace of mind for those who plan to travel in cold or high altitude conditions where heavy snow falls are anticipated. By rotating the air ram to face away from the prevailing wind/direction of motion, the air ram delivers additional protection from the choking effects of snow build-up inside the air intake.

air_ram_sm.jpg

h3_detail1.jpg

The Safari Snorkel body is manufactured to the highest standards in durable, UV stable, cross linked polyethylene material. In addition, the substantial material wall thickness delivers huge physical strength to ensure that the snorkel breezes through the toughest off-road conditions on the planet.

The Safari Snorkel system is supplied as a complete and comprehensive system that includes every nut, bolt and bracket required for installation - right from robust zero-corrosion stainless steel studs, self-locking nyloc nuts and large diameter anodized body washers through to the tough plastic A-pillar inserts.





Only the 2008 and up years snorkels are available. Snorkels will fit 2008 and up models with all engines I5 and V8. Other years and models are pre-order only with no ETA









PRICE LIST $595.00 NEW PRICE $325.00 NEED MORE INFO PLEASE PM ME THANKS







Safari snorkel

Specifically designed to suit the HUMMER H3, a Safari snorkel will significantly reduce the likelihood of costly engine damage that can result from dust, debris and water ingestion. It does this by relocating the air intake point on the H3 from the relatively low and vulnerable position under the hood to a higher and safer location where a constant source of cool, clean, dry air is available.

[dwaxman1]

looks cool.. they should have one for a H2....

[T.C.]

[quote name='dwaxman1' date='30 January 2010 - 06:42 PM' timestamp='1264894939' post='390']

looks cool.. they should have one for a H2....

[/quote]





NOT AT THIS TIME ..I KNOW KEVIN WAS WORKING ON ONE FOR THE H2 <img src='http://www.canadianhummerclub.com/forum ... /smile.gif' class='bbc_emoticon' alt=':)' />

[dwaxman1]

And??? I am waiting for one.. I have not heard from our Friend Kev in a long time.. anyways.. Lets see if can get some H3s on here

[black rhino]

hi tc its kevin in toronto do you loose the antanna on the h3sif not im interested for putting one on

[T.C.]

[quote name='black rhino' date='31 January 2010 - 09:43 PM' timestamp='1264992205' post='475']

hi tc its kevin in toronto do you loose the antanna on the h3sif not im interested for putting one on

[/quote]





I WILL FIND OUT <img src='http://www.canadianhummerclub.com/forum ... iggrin.gif' class='bbc_emoticon' alt=':D' />

[shotgun-cam]

[quote name='T.C.' date='31 January 2010 - 10:33 PM' timestamp='1264995207' post='488']

I WILL FIND OUT <img src='http://www.canadianhummerclub.com/forum ... iggrin.gif' class='bbc_emoticon' alt=':D' />

[/quote]

[shotgun-cam]

Tony just enlarged pic yes H3's antenna has to be removed or mount extended out to clear snorkle. Alternatively move antenna elsewhere or route antenna thru snorkle and seal holes with sealant. nothing is ever simple.