Wrenching Party

Here is a great place to Post events in your Area!!
User avatar
GOTWAR
Club Member
Posts: 14
Joined: Wed Apr 27, 2011 10:52 pm
Location: Oshawa

Re: Wrenching Party

Post by GOTWAR »

We will be there. I have lots to do
User avatar
GreenMeanie
CHC Pilot
Posts: 426
Joined: Tue Jul 22, 2008 3:28 am

Re: Wrenching Party

Post by GreenMeanie »

If there is a shortage of things to do i have a drivers window regulator issue that needs a diagnostic. Motor works, switch works but window sticks halfway and you have to help it up or down past where it sticks. Hoping its a backed out screw or something simple.
Also need my starter looked at as it grinds out from time to time for like the past 5 years LOL
All other issues i have are too boring to get into for a wrenching party IMO
Always happy to help with other trucks as well. I think it would be fun to yank the Jagger motor. We could learn a bunch from that!!
Last edited by GreenMeanie on Thu Aug 27, 2015 8:00 pm, edited 1 time in total.
Early 1997 HMC4, 1 of 35, Original Block H296, 110,000 miles and no cracks yet, G10 green
Custom made Brush Gaurd, Roof Rack, Overhead Console and Sound System.
User avatar
Roy
CHC Trail SuperGuide
Posts: 1933
Joined: Tue Dec 29, 2009 8:21 pm
Location: Stratford,Ontario

Re: Wrenching Party

Post by Roy »

So far,
Kevin maybe a window alignment,H1
Ron maybe running boards on an H3
Chris has a project he is doing slowly H1
Sonny may need an e brake pull and brake check-- good truck to do a lot of teaching with
James may need a check over and some repair/tires
 
If all show, this could be a busy day of work and training.
Last edited by Roy on Fri Aug 28, 2015 9:55 pm, edited 1 time in total.
                                      99 Wagon
                          5.9 Cummins 12 valve  mech.                                     Stocking most parts to fix your H1  :smil9:
                                   41.5-13.5 R16.5 Pitbull Rockers,
                                     Auburn lockers front and rear
                                  Full custom underbody protection
                                                3" body lift
                                          4" side rock tubes                                 
                               12100 rear cv shafts                                                                        
 
 
 
 
519-272-1761   :cellphone:
<p style="text-align:center;"> 
User avatar
Roy
CHC Trail SuperGuide
Posts: 1933
Joined: Tue Dec 29, 2009 8:21 pm
Location: Stratford,Ontario

Re: Wrenching Party

Post by Roy »

[quote="Toxicrider"]
Am available the 30th but the 20th I am wheeling up on Drummond Island in Michigan.
[/quote]
You should post these events for others to think about coming.
                                      99 Wagon
                          5.9 Cummins 12 valve  mech.                                     Stocking most parts to fix your H1  :smil9:
                                   41.5-13.5 R16.5 Pitbull Rockers,
                                     Auburn lockers front and rear
                                  Full custom underbody protection
                                                3" body lift
                                          4" side rock tubes                                 
                               12100 rear cv shafts                                                                        
 
 
 
 
519-272-1761   :cellphone:
<p style="text-align:center;"> 
User avatar
ROADBLOK
CHC Pilot
Posts: 376
Joined: Mon Dec 12, 2011 12:39 pm
Location: Toronto, Ontario

Re: Wrenching Party

Post by ROADBLOK »

[quote="Roy"]
James may need a check over and some repair/tires
[/quote]
 
 
Guess you've made up my mind for me.   :P
User avatar
Roy
CHC Trail SuperGuide
Posts: 1933
Joined: Tue Dec 29, 2009 8:21 pm
Location: Stratford,Ontario

Re: Wrenching Party

Post by Roy »

I guess no body wanted to use the shop and tools,
 
I thank Chris ,Andrea, Kevin P. ,Ron and Kevin T. for showing up to lend a hand fixing trucks.
---nobody else showed---
 
They all did a great deed without getting dirty,other than eating at the BBQ.
 
 
On Sept 20., I will need a comfirmed showing or event will be cancelled.
Last edited by Roy on Mon Aug 31, 2015 9:24 pm, edited 1 time in total.
                                      99 Wagon
                          5.9 Cummins 12 valve  mech.                                     Stocking most parts to fix your H1  :smil9:
                                   41.5-13.5 R16.5 Pitbull Rockers,
                                     Auburn lockers front and rear
                                  Full custom underbody protection
                                                3" body lift
                                          4" side rock tubes                                 
                               12100 rear cv shafts                                                                        
 
 
 
 
519-272-1761   :cellphone:
<p style="text-align:center;"> 
User avatar
whitehumh2
CHC Trail SuperGuide
Posts: 4529
Joined: Tue Jul 04, 2006 11:47 pm
Location: Lachine, Quebec

Re: Wrenching Party

Post by whitehumh2 »

So nothing got fixed??? No mods or training??? :wtf:
<p class="bbc_center">1 - There is a time for everything,

and a season for every activity under the heavens:

3b - a time to tear down and a time to build,

5 - a time to scatter stones and a time to gather them,

Ecclesiastes 3:1,3b&5a
User avatar
eebh2
Club Member
Posts: 41
Joined: Wed Apr 15, 2015 8:16 pm

Re: Wrenching Party

Post by eebh2 »

I have my Fox 2.0 shocks on order for my H2 and should get them next week. Maybe I should cancel my install appt and bring them out to be put on. Also my rear wiper doesn't work just makes a clicking noise but the wiper does not turn. So I have work to be done. Also have a squeaking noise first thing in the morning when I turn right. Mechanic cannot figure out what it is as it only does it for the first 15 mins in the morning and then the sound disappears.
User avatar
Roy
CHC Trail SuperGuide
Posts: 1933
Joined: Tue Dec 29, 2009 8:21 pm
Location: Stratford,Ontario

Re: Wrenching Party

Post by Roy »

[quote="Polar Bear"]
So nothing got fixed??? No mods or training??? :wtf:
[/quote]
Nothing! :whatever:
                                      99 Wagon
                          5.9 Cummins 12 valve  mech.                                     Stocking most parts to fix your H1  :smil9:
                                   41.5-13.5 R16.5 Pitbull Rockers,
                                     Auburn lockers front and rear
                                  Full custom underbody protection
                                                3" body lift
                                          4" side rock tubes                                 
                               12100 rear cv shafts                                                                        
 
 
 
 
519-272-1761   :cellphone:
<p style="text-align:center;"> 
User avatar
Roy
CHC Trail SuperGuide
Posts: 1933
Joined: Tue Dec 29, 2009 8:21 pm
Location: Stratford,Ontario

Re: Wrenching Party

Post by Roy »

[quote="eebh2"]
I have my Fox 2.0 shocks on order for my H2 and should get them next week. Maybe I should cancel my install appt and bring them out to be put on. Also my rear wiper doesn't work just makes a clicking noise but the wiper does not turn. So I have work to be done. Also have a squeaking noise first thing in the morning when I turn right. Mechanic cannot figure out what it is as it only does it for the first 15 mins in the morning and then the sound disappears.
[/quote]
Lets see whom else will be out, I do not like to shut down for a wrenching party and do nothing!
                                      99 Wagon
                          5.9 Cummins 12 valve  mech.                                     Stocking most parts to fix your H1  :smil9:
                                   41.5-13.5 R16.5 Pitbull Rockers,
                                     Auburn lockers front and rear
                                  Full custom underbody protection
                                                3" body lift
                                          4" side rock tubes                                 
                               12100 rear cv shafts                                                                        
 
 
 
 
519-272-1761   :cellphone:
<p style="text-align:center;"> 
Post Reply