What are you guys running for CV boots and where do you get them. Need the rears done and don't want the hard plastic style.
Cheers
cv boots
- Roy
- CHC Trail SuperGuide
- Posts: 1933
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Re: cv boots
The aftermarket neoprene are not really good. Doing a test on a truck now,One of two boots riped in the first week.Test is still going.
I am ordering in a few boots this week in case you want to order some as well.
I am ordering in a few boots this week in case you want to order some as well.
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1

41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761 
<p style="text-align:center;"> 
- Rocrusher
- CHC Pilot
- Posts: 107
- Joined: Sun Mar 05, 2017 4:42 pm
Re: cv boots
Sounds good Roy. I guess I would stick with stock ones then. How much are they and would you need payment first?
- Roy
- CHC Trail SuperGuide
- Posts: 1933
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Re: cv boots
Will order extras, Let you know when in stock.
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1

41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761 
<p style="text-align:center;"> 
- Monk
- CHC Trail SuperGuide
- Posts: 1232
- Joined: Mon Oct 01, 2012 10:36 am
- Location: Ontario
Re: cv boots
Now that my rear boot are done, I feel better, was always worried about road crap screwing with the bearings inside
96 HMC4
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
- Rocrusher
- CHC Pilot
- Posts: 107
- Joined: Sun Mar 05, 2017 4:42 pm
Re: cv boots
Thanks roy.
I hear ya monk. Thats what i worry about!
How about rotor and pads. What do you guys use? Was thinking of napa.don't need them really but would like to have them perfect.
I hear ya monk. Thats what i worry about!
How about rotor and pads. What do you guys use? Was thinking of napa.don't need them really but would like to have them perfect.