Hood rubber snubbers
-
Monk
- CHC Trail SuperGuide
- Posts: 1232
- Joined: Mon Oct 01, 2012 10:36 am
- Location: Ontario
Hood rubber snubbers
What do you think? They served there time?
You do not have the required permissions to view the files attached to this post.
Last edited by Monk on Thu Jun 01, 2017 8:53 pm, edited 1 time in total.
96 HMC4
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
-
Monk
- CHC Trail SuperGuide
- Posts: 1232
- Joined: Mon Oct 01, 2012 10:36 am
- Location: Ontario
Re: Hood rubber snubbers
If you look carefully inside the side snubbers there was rubber packed in there to make it last longer but even those wore out.....hehe
Last edited by Monk on Thu Jun 01, 2017 8:52 pm, edited 1 time in total.
96 HMC4
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
-
Boeing Jet
- CHC Trail SuperGuide
- Posts: 1425
- Joined: Wed Dec 30, 2009 9:48 am
- Location: Toronto
Re: Hood rubber snubbers
Time to change.
-
ddgermann
- CHC Pilot
- Posts: 299
- Joined: Sat Jun 15, 2013 11:07 pm
- Location: Edmonton
Re: Hood rubber snubbers
Yup... I changed mine and hood rattle was gone.
1999 H1 HMC4 (black on black)
Hummer: from The Century Dictionary and Cyclopedia. n.[font=inherit;font-size:.9em;font-style:inherit;font-weight:inherit] "One who, or that which excels in any quality, especially in general energy or speed."[/font]
Hummer: from The Century Dictionary and Cyclopedia. n.[font=inherit;font-size:.9em;font-style:inherit;font-weight:inherit] "One who, or that which excels in any quality, especially in general energy or speed."[/font]
-
Roy
- CHC Trail SuperGuide
- Posts: 1933
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Re: Hood rubber snubbers
Must be a past jeep owner! LOL just joking
See ya soon for parts you have ordered!
See ya soon for parts you have ordered!
Last edited by Roy on Fri Jun 02, 2017 8:26 am, edited 1 time in total.
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761 
<p style="text-align:center;"> -
Monk
- CHC Trail SuperGuide
- Posts: 1232
- Joined: Mon Oct 01, 2012 10:36 am
- Location: Ontario
Re: Hood rubber snubbers
What a difference is all I can say , I did not realize the hood was sitting really low until those new rubber snubbers were in, even a rattle noise that didn't really bug me (but was there) is now gone....
Only snag was that darn center rubber block for the hood. Wow she was a rusted
Mess.... Lol need special persuasion to remove those bolts
This is the after pic....what a diffrence
Only snag was that darn center rubber block for the hood. Wow she was a rusted
Mess.... Lol need special persuasion to remove those bolts
This is the after pic....what a diffrence
You do not have the required permissions to view the files attached to this post.
Last edited by Monk on Fri Jun 02, 2017 7:26 pm, edited 1 time in total.
96 HMC4
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
-
Monk
- CHC Trail SuperGuide
- Posts: 1232
- Joined: Mon Oct 01, 2012 10:36 am
- Location: Ontario
Re: Hood rubber snubbers
Then I ask royy for the rubber piece that goes around the intake stack...
Lol, he says which one and I'm looking at him sideways not knowing what he meant....hehhe
Apparently there's a seal that goes around the pipe and there's also a seal that goes on the physical Hood itself....which I didn't have any hood seal.... so I grabbed both of those seals looks nice now
Lol, he says which one and I'm looking at him sideways not knowing what he meant....hehhe
Apparently there's a seal that goes around the pipe and there's also a seal that goes on the physical Hood itself....which I didn't have any hood seal.... so I grabbed both of those seals looks nice now
You do not have the required permissions to view the files attached to this post.
96 HMC4
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
-
Monk
- CHC Trail SuperGuide
- Posts: 1232
- Joined: Mon Oct 01, 2012 10:36 am
- Location: Ontario
Re: Hood rubber snubbers
On a side note about that top Center rubber block that was a pain in the butt,
Apparently it bolts to a steel plate underneath and it was so froze ,the bolts ended up breaking, well after had to grind the head of the bolts....then Roy to the rescue he machine me a new plate and tapped it, so the rubber block had a nice new steel piece underneath
Having a machine shop REALLY makes some jobs sweet
Apparently it bolts to a steel plate underneath and it was so froze ,the bolts ended up breaking, well after had to grind the head of the bolts....then Roy to the rescue he machine me a new plate and tapped it, so the rubber block had a nice new steel piece underneath
Having a machine shop REALLY makes some jobs sweet
You do not have the required permissions to view the files attached to this post.
Last edited by Monk on Fri Jun 02, 2017 7:35 pm, edited 1 time in total.
96 HMC4
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
-
Monk
- CHC Trail SuperGuide
- Posts: 1232
- Joined: Mon Oct 01, 2012 10:36 am
- Location: Ontario
Re: Hood rubber snubbers
Well I put new snub bolts in today, and while I was at it, I replaced the rubber hold down latch bolts, (I'm sure very original as well)
Lol, THOSE were touch n go for a bit, soooo corroded / tight
Roy mentioned to tighten th bolt a little as well to , crack the bolt loose and after back and forth action she slowly unbolted,
Lol after wiping the beads of sweat off my forehead , I put a lube on the inside threads,and then anti seized dipped the bolts when
I installed the new bolts,
Lol , anti seize is a saviour at times....haha
I also ordered/ got window switch bezels for the back doors from Roy yesterday and installed those today as well..... My old ones were garbage
Lol, THOSE were touch n go for a bit, soooo corroded / tight
Roy mentioned to tighten th bolt a little as well to , crack the bolt loose and after back and forth action she slowly unbolted,
Lol after wiping the beads of sweat off my forehead , I put a lube on the inside threads,and then anti seized dipped the bolts when
I installed the new bolts,
Lol , anti seize is a saviour at times....haha
I also ordered/ got window switch bezels for the back doors from Roy yesterday and installed those today as well..... My old ones were garbage
Last edited by Monk on Sat Jun 03, 2017 3:42 pm, edited 1 time in total.
96 HMC4
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
-
Rocrusher
- CHC Pilot
- Posts: 107
- Joined: Sun Mar 05, 2017 4:42 pm
Re: Hood rubber snubbers
Don't you just love fixing a bunch of little things. Sometimes i like more that one big one. I have a neighbor with a 98 wagon. Says it is knocking badly. And he has stopped driving it. He is going to bring it by in the next few weeks for me to look at. Maybe a possible motor swap!