6.5 l Diesel engine problem, valves or bearings?

Monk · Post by **Monk** » Sun Sep 03, 2017 11:30 am

Careful he might get pissed and leave a treat on the drives seat..., hahaha that cat pic is hilarious !!!

ddgermann · Post by **ddgermann** » Sun Sep 03, 2017 7:17 pm

Good news Wolf. Makes sense a couple would be bent over the bad hole. And nice there was no cracks.

Looks like you have a fresh 6.5 Amigo.

Good luck evicting the cats.

Look forward to seeing a video of this beast running.

D

WolfinJeepsClothing · Mon Sep 04, 2017 12:41 am

It was a struggle to get the injector lines connected, it sort of like a jigsaw puzzle to get them to line up without interfering its each other. I had to whip over to Canadian Tire to get a set of crows-foot sockets since there is no other way to get the lower four lines. It was $50 for the SAE set and all I needed was the 5/8", oh well. They have a sweet deal on large ratcheting combination (21-25mm and 15/16 to 1 1/8") wrenches 65% off, or also $50 so I got those too since the Humvee tends to have bigger fasteners than my existing set can handle.

Fuel lines in and torqued, intake and exhaust manifolds on, and I managed to get the broken bolt out of my alternator bracket too...

IMG_1911.JPG

IMG_1913.JPG

IMG_1914.JPG

IMG_1915.JPG

For once the easy out didn't break, the bolt was snapped off about half an inch below the face of the bracket.

Monk · Post by **Monk** » Mon Sep 04, 2017 7:05 am

I think I'd go crazy try to figure out injector line if they weren't marked,,,,heehhe

My relaxing puzzle skills, are low,....

Yes that motor will last a life time, and being mostly mechanical , a lot less items to go wrong .

WolfinJeepsClothing · Sun Sep 10, 2017 10:50 pm

So I got a chance to work on the truck again today, had to work yesterday, and close the pool so it was a busy weekend. There are still a lot of lines and hoses to connect and I want to flush the radiators before connecting everything permanently.

Pool open, pool closed....

IMG_20170909_153628.jpg

IMG_20170909_180613.jpg

Engine out, engine in....

IMG_20170910_122924.jpg

IMG_20170910_162258.jpg

I didn't expect to get so much use out of the cover, but with many lines still disconnected I want to keep all the rain out.

IMG_20170910_202826.jpg

ddgermann · Post by **ddgermann** » Sun Sep 10, 2017 11:02 pm

Its taking shape Wolf!
Love the camo tarp.

Pool looks great too... Summer goes by too fast.
:rockon:

Monk · Post by **Monk** » Sat Sep 16, 2017 12:51 pm

Incredible how the engine fills everywhere,....almost there!!!

WolfinJeepsClothing · Post by **WolfinJeepsClothing** » Sun Sep 17, 2017 6:32 pm

It will be some time before I get back to working on it since we are in the UK for a few weeks.

ddgermann · Post by **ddgermann** » Sun Sep 17, 2017 7:09 pm

Your Truck will be waiting and we will be here to cheer you on Wolf. It's all good

Monk · Post by **Monk** » Mon Sep 18, 2017 10:58 am

Damn you!!

It like a great TV series, (learning lots& enjoying pics) and now it off air for 3 weeks!!

Well then, keep us post when the new season premier starts

Excuse me, while I go strike a match on my old/dirty motor, hehe

On a serious note, the hard/ heavy stuff is done, and imo, just putting together a jig saw puzzle....before you know it,

You'll hear her purring again,...,,,,,, (plus and angry cat, for losing his home)haha

Canadian Hummer Club Forums

6.5 l Diesel engine problem, valves or bearings?

Re: 6.5 l Diesel engine problem, valves or bearings?

Re: 6.5 l Diesel engine problem, valves or bearings?

Re: 6.5 l Diesel engine problem, valves or bearings?

Re: 6.5 l Diesel engine problem, valves or bearings?

Re: 6.5 l Diesel engine problem, valves or bearings?

Re: 6.5 l Diesel engine problem, valves or bearings?

Re: 6.5 l Diesel engine problem, valves or bearings?

Re: 6.5 l Diesel engine problem, valves or bearings?

Re: 6.5 l Diesel engine problem, valves or bearings?

Re: 6.5 l Diesel engine problem, valves or bearings?