2003 Hummer H1 Build Thread.

[T.C.]

[quote author=Tom link=topic=808.msg6009#msg6009 date=1229460799]

It's already sitting here.. I just don't feel like removing the doghouse at ALL!! I figure I will kill a few birds with one stone when I get injectors to replace to.

[/quote]











THAT SOUNDS GOOD......IF YOU NEED INFO ON THE PREDATOR Wastegate Controller  ...TALK TO KEVIN HE INSTALLED THAT UNIT ON MY TRUCK

[Injunfarian]

[quote author=Tom link=topic=808.msg6010#msg6010 date=1229460877]

Thanks Martin! That's quite the compliment!

I own an advertising firm, and the other half of that shop is my office. The bay door part of the shop is purely for fun  <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' />

[/quote]



Man wish I had a office/hobby shop heh. Right now im just working out of my house but plan to put up a 25x28ft shop in the backyard this spring.



Cant wait to see the progress of this beast... it sure is going alot quicker than my H1 progress heh.

[Tom]

Here are some shots of the installed Boost Gauge, ScanGauge II and steering wheel. The steering wheel is semi-permanent as it was originally intended for the Cobra, but I kind of like it on the Hummer.



[img width=500 height=375]http://www.tglogowski.com/shots/gauge.jpg[/img]

[img width=500 height=375]http://www.tglogowski.com/shots/wheel.jpg[/img]



I am waiting on my EGT guage, which will be a combination gauge with Roll/Pitch, a inclinometer, and several other really cool features, stay tuned!

[whitehumh2]

Looks Great Tom, keep up the good work! BTW, did you disconnect the factory locker box when you installed the RD Switch Panel??? Also did you connect the fast idle and the winch control yet??? Just Curious!?!



Happy New Year!



A More New Mods! <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' />



Kev

[Tom]

[quote author=whitehumh2 link=topic=808.msg6103#msg6103 date=1230763374]

Looks Great Tom, keep up the good work! BTW, did you disconnect the factory locker box when you installed the RD Switch Panel??? Also did you connect the fast idle and the winch control yet??? Just Curious!?!



Happy New Year!



A More New Mods! <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' />



Kev

[/quote]



Winch and Fast Idle are connected, the Factory locker no.. I am considering it but not sure how to go about it?



Also a bit of an update.. the exhaust came in and is installed <img src='http://www.canadianhummerclub.com/forum ... /smile.gif' class='bbc_emoticon' alt=':)' /> Sounds much nicer and the turbo is much more significant.

Just need to find a nice 4" tip to top it off <img src='http://www.canadianhummerclub.com/forum ... /smile.gif' class='bbc_emoticon' alt=':)' />

[Tom]

I have been away in the Bahamas, but came back on Monday, and several things came in while I was away, so I spent the last two days working away. Here is an update of what was done:



New Madman Inclinometer/EGT Gauge/Boost Gauge/Oil Pressure/Temp/ Gauge install:

[img width=500 height=375]http://www.tglogowski.com/Hummerinstalls/install1.jpg[/img]

Rear Pioneer 7" Monitor

[img width=500 height=375]http://www.tglogowski.com/Hummerinstalls/install2.jpg[/img]

Passenger 7" Monitor

[img width=500 height=375]http://www.tglogowski.com/Hummerinstalls/install3.jpg[/img]

Close up (bitch to install, took alot of heating the plastic frame and twisting to conform to the angles of the crash pad

[img width=480 height=640]http://www.tglogowski.com/Hummerinstalls/install4.jpg[/img]

Monitors on:

[img width=500 height=375]http://www.tglogowski.com/Hummerinstalls/install5.jpg[/img]

Predator Fuel Pump (and a new fuel filter)

[img width=500 height=375]http://www.tglogowski.com/Hummerinstalls/install6.jpg[/img]

EGT Probe installed, and Dual filter kit with Synthetic Filters.

[img width=480 height=640]http://www.tglogowski.com/Hummerinstalls/install7.jpg[/img]

Rear H1 Badge:

[img width=500 height=375]http://www.tglogowski.com/Hummerinstalls/install8.jpg[/img]

Front Battery access (trickle charge, boosts, etc)

[img width=500 height=375]http://www.tglogowski.com/Hummerinstalls/install9.jpg[/img]

5" Exhaust Tip (Double Walled)

[img width=500 height=375]http://www.tglogowski.com/Hummerinstalls/install10.jpg[/img]

New Fuel Selector Switch location:

[img width=500 height=375]http://www.tglogowski.com/Hummerinstalls/install11.jpg[/img]

[Tom]

I think the truck is pretty much done, now its time to start saving/gathering all the parts necessary to do a Duramax conversion in about 6 months.



Here is the brushguard changed over:



[img width=500 height=375]http://www.tglogowski.com/hummer/guard1.jpg[/img]

[img width=500 height=375]http://www.tglogowski.com/hummer/guard2.jpg[/img]

[img width=500 height=375]http://www.tglogowski.com/hummer/guard3.jpg[/img]

[img width=500 height=375]http://www.tglogowski.com/hummer/guard4.jpg[/img]