Re: Front Licence Plate Ontario
Posted: Fri Oct 15, 2010 12:49 pm
For any of the H1 owners on here looking for another solution to mounting their plates without it hanging below the winch fairlead, or blocking the fairlead, this is what I have done, using the grill guard and a couple of KC Hilite Mounting solutions:


Basically, after having lost 3 front plates in a month, from having been mounted on the bracket that hangs below the fairlead (as still seen in that photo), I got fed up. The brackets I used cost less than $30, and were able to be used for grill-guards tubing that was anywhere from 1-2.5" (iirc). KC Hilite part number was 7307, but I know that PIAA has a couple solutions for grill guard mounting solutions for tubing anywhere from 1.25" all the way to 3" like the ones below



Basically, after having lost 3 front plates in a month, from having been mounted on the bracket that hangs below the fairlead (as still seen in that photo), I got fed up. The brackets I used cost less than $30, and were able to be used for grill-guards tubing that was anywhere from 1-2.5" (iirc). KC Hilite part number was 7307, but I know that PIAA has a couple solutions for grill guard mounting solutions for tubing anywhere from 1.25" all the way to 3" like the ones below

