HUMMERS EVENT Mt. Tremblant in the Quebec
-
T.C.
- CHC Trail Guide
- Posts: 594
- Joined: Wed Dec 30, 2009 7:25 pm
- Location: ST. SAUVEUR
-
T.C.
- CHC Trail Guide
- Posts: 594
- Joined: Wed Dec 30, 2009 7:25 pm
- Location: ST. SAUVEUR
Re: HUMMERS EVENT Mt. Tremblant in the Quebec
long range weather forecast looks verygood .....cool
HUMMER LIFE
-
Roy
- CHC Trail SuperGuide
- Posts: 1933
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Re: HUMMERS EVENT Mt. Tremblant in the Quebec
WOW, what a week. Lots of carnage on the trucks. Super , advanced level trails. The Super modified H2 was welcome to run with the big guys, he tried his best , and broke like all the other trucks. The big boys have convinced a couple 37 ers to convert to the dark side --40's or bigger! Those whom made it had fun, those who did not missed a great week of off roading and socializing.
I personally cannot wait for the Oct event in Tennessee.
I personally cannot wait for the Oct event in Tennessee.
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761 
<p style="text-align:center;"> -
sdaniel
- Club Member
- Posts: 28
- Joined: Mon May 21, 2012 8:01 pm
Re: HUMMERS EVENT Mt. Tremblant in the Quebec
Roy I cannot agree with you more. An amazing week. Cant wait for more trails. I'm on a high today.
-
whitehumh2
- CHC Trail SuperGuide
- Posts: 4529
- Joined: Tue Jul 04, 2006 11:47 pm
- Location: Lachine, Quebec
Re: HUMMERS EVENT Mt. Tremblant in the Quebec
What an Amazing Week! The Trails were totally Awesome and we made a bunch of new friends. I agree this was the Best Rally Ever!!! My Mighty H2 lead and managed to keep ahead of the Mighty H1 Battlion!
While they broke tons of parts...so did my H2. Here is my parts recap;
May 10th, Pre- Run: Popped a tire off the bead and snapped a tie-rod end.
May 14th, First run to the top of New Trail 7H: snapped one tie-rod end on the second hill climb, I installed a new Moog set and Roy's New Tie Rod Sleeve...then broke the other side 300ft further up the trail on hill 3, then did the same repair and I had no further tie rod issues!
May15th, Deep Deep mud/clay run: Exploded my driver's side CV joint about 1500ft from the end of the trail.
May 16th, did repairs at 7:30am to replace the CV Shaft and found 2 upper ball joints with excessive play so I replaced those also, no breakages on the trail at all and I lead and kept up with the Monster H1s on 42s with no issues!
May 17th, Did some of the hardest trails and snapped the same CV joints on a stupid nothing little rock...installed my last spare!
May 18th, Wheeled all day and on the last trail snapped my Pitman arm and idler arm and idler arm support!
So yes, I broke a bunch of parts BUT Many of the parts had been on my H2 for almost 8 years...so I think I had some metal fatigue! The new replacement parts will be the Best Supper Heavy Duty parts available...and this won't happen again...and least not the Pitman and Idler Arms! Tie-rods are fuses in my opinion!
While they broke tons of parts...so did my H2. Here is my parts recap;
May 10th, Pre- Run: Popped a tire off the bead and snapped a tie-rod end.
May 14th, First run to the top of New Trail 7H: snapped one tie-rod end on the second hill climb, I installed a new Moog set and Roy's New Tie Rod Sleeve...then broke the other side 300ft further up the trail on hill 3, then did the same repair and I had no further tie rod issues!
May15th, Deep Deep mud/clay run: Exploded my driver's side CV joint about 1500ft from the end of the trail.
May 16th, did repairs at 7:30am to replace the CV Shaft and found 2 upper ball joints with excessive play so I replaced those also, no breakages on the trail at all and I lead and kept up with the Monster H1s on 42s with no issues!
May 17th, Did some of the hardest trails and snapped the same CV joints on a stupid nothing little rock...installed my last spare!
May 18th, Wheeled all day and on the last trail snapped my Pitman arm and idler arm and idler arm support!
So yes, I broke a bunch of parts BUT Many of the parts had been on my H2 for almost 8 years...so I think I had some metal fatigue! The new replacement parts will be the Best Supper Heavy Duty parts available...and this won't happen again...and least not the Pitman and Idler Arms! Tie-rods are fuses in my opinion!
Last edited by whitehumh2 on Tue May 20, 2014 10:19 pm, edited 1 time in total.
<p class="bbc_center">1 - There is a time for everything,
and a season for every activity under the heavens:
3b - a time to tear down and a time to build,
5 - a time to scatter stones and a time to gather them,
Ecclesiastes 3:1,3b&5a
and a season for every activity under the heavens:
3b - a time to tear down and a time to build,
5 - a time to scatter stones and a time to gather them,
Ecclesiastes 3:1,3b&5a
-
PSE30
- Club Member
- Posts: 15
- Joined: Sun Mar 03, 2013 1:56 pm
Re: HUMMERS EVENT Mt. Tremblant in the Quebec
Hey if your in orillia I'll try just moved here have no one to wheel with here and won't go alone. Any one. Lol. And that's a bad a$$ video.
-
yevych
- CHC Pilot
- Posts: 216
- Joined: Thu Mar 04, 2010 1:35 pm
- Location: Toronto
- Contact:
Re: HUMMERS EVENT Mt. Tremblant in the Quebec
[quote="PSE30"]
Hey if your in orillia I'll try just moved here have no one to wheel with here and won't go alone. Any one. Lol. And that's a bad a$$ video.
[/quote]
Hey PSE30. I am in Richmond Hill... next time I go - I'll ping you. I go on trails on my own sometime - it's hard to organize... Here are some videos places not too far from Orillia:
<a href="https://www.youtube.com/playlist?list=P ... mjTXT_H</a>
Hey if your in orillia I'll try just moved here have no one to wheel with here and won't go alone. Any one. Lol. And that's a bad a$$ video.
[/quote]
Hey PSE30. I am in Richmond Hill... next time I go - I'll ping you. I go on trails on my own sometime - it's hard to organize... Here are some videos places not too far from Orillia:
<a href="https://www.youtube.com/playlist?list=P ... mjTXT_H</a>
2010 H3 Adventure 3.7L - Hummer evolution 
, 35" Mickey Thomson MTZ on 16" MT SideBiters, oem underbody & rocker protection, Safari snorkle, K&N filters, Air Doc intake, Rola roof rack, Off-road lights, Runva winch on High-Mount and Warn on tray, Outfitter heavy duty tie rods.
, 35" Mickey Thomson MTZ on 16" MT SideBiters, oem underbody & rocker protection, Safari snorkle, K&N filters, Air Doc intake, Rola roof rack, Off-road lights, Runva winch on High-Mount and Warn on tray, Outfitter heavy duty tie rods.