Sugarphreak's H3T

The great Hummer look and Beefier then you average Compact SUV
Post Reply
User avatar
Sugarphreak
CHC Pilot
Posts: 329
Joined: Mon Feb 08, 2010 6:05 pm

Re: Sugarphreak's H3T

Post by Sugarphreak »

Good news is they look great.... bad news is I need to crank the torsion bar a good inch or so up to make additional clearance to the back of the front inner fender <img src='http://www.canadianhummerclub.com/forum ... ngHead.gif' class='bbc_emoticon' alt=':banghead:' />



Image

Image

Image
Top
User avatar
s0ulst3al3r
CHC Trail Guide
Posts: 521
Joined: Mon Feb 22, 2010 12:19 am

Re: Sugarphreak's H3T

Post by s0ulst3al3r »

daaaaaaaaaaamn that looks good nick
Lifted , locked and ready to rock!

2005 H2 SUT - 2007 Chopper



✯☠✯
Top
User avatar
johnnyspikesH3
CHC Trail Guide
Posts: 671
Joined: Thu Mar 17, 2011 4:41 pm
Location: MISSISSAUGA ,ONTARIO

Re: Sugarphreak's H3T

Post by johnnyspikesH3 »

Looks amazing ! If you could find a set of GM ROOF MAKER LIGHTS (DISCOUNTINUED). There's a few sets flouting around . That would be the cherry on top ! IMO
<p>2014 JKU SAHARA , 3.6L AUTO ,4 INCH PRO COMP STAGE ONE WITH MX6 SHOCKS AND PC DUAL STABILIZERS, PRO COMP ADJUSTABLE TRACK BAR,RUBICON EXPRESS DROP CONTROL ARM BRACKETS 35.12.50-17 FIERCE ATTITUDE, 17x9 PRO COMP 7031 WHEELS,KC 6 INCH AND 5 INCH LIGHTS AND BRACKETS, WARRIOR REAR TIRE SPACER , SMITTYBILT SEAT COVERS. ROUGH COUNTRY STUBBY BUMPER , SMITTYBILT 10,000LB X20 WINCH, COAST FRONT DRIVE-SHAFT, DYNOMAX CAT BACK EXHAUST
Top
User avatar
dwaxman1
CHC Trail Guide
Posts: 957
Joined: Wed Dec 09, 2009 6:20 pm
Location: , Ontario

Re: Sugarphreak's H3T

Post by dwaxman1 »

[quote name='johnnyspikesH3' timestamp='1320306700' post='32146']

Looks amazing ! If you could find a set of GM ROOF MAKER LIGHTS (DISCOUNTINUED). There's a few sets flouting around . That would be the cherry on top ! IMO

[/quote]



I saw a set the other day for about $750...I thought that was a bit over priced but I am not sure of the original price...
<!-- isHtml:1 --><!-- isHtml:1 --> 
Top
User avatar
Sugarphreak
CHC Pilot
Posts: 329
Joined: Mon Feb 08, 2010 6:05 pm

Re: Sugarphreak's H3T

Post by Sugarphreak »

Good news, cranked up the height on the front an additional inch.... all clear now when it turns! <img src='http://www.canadianhummerclub.com/forum ... ght_on.gif' class='bbc_emoticon' alt=':right_on:' />



I was only up about a half inch over stock anyway, I've heard of people going as much as 2.75" over stock with no issues.
Last edited by Sugarphreak on Thu Nov 03, 2011 7:56 pm, edited 1 time in total.
Top
User avatar
Copperhead
Club Member
Posts: 28
Joined: Wed Oct 03, 2007 9:01 pm

Re: Sugarphreak's H3T

Post by Copperhead »

what can one say but......DAMN that looks good!, very nice ride indeed
Top
User avatar
08SolarFlareH3
Club Member
Posts: 4
Joined: Fri Oct 21, 2011 11:18 am

Re: Sugarphreak's H3T

Post by 08SolarFlareH3 »

Sugarphreak, the T is looking great! What does it measure hub to fender now? As long as it is under 24", you will be fine.
Top
User avatar
Sugarphreak
CHC Pilot
Posts: 329
Joined: Mon Feb 08, 2010 6:05 pm

Re: Sugarphreak's H3T

Post by Sugarphreak »

[quote name='08SolarFlareH3' timestamp='1320499505' post='32267']

Sugarphreak, the T is looking great! What does it measure hub to fender now? As long as it is under 24", you will be fine.

[/quote]



She is sitting right around 23-1/2" inch from center of hub to underside of fender right now
Top
User avatar
Sugarphreak
CHC Pilot
Posts: 329
Joined: Mon Feb 08, 2010 6:05 pm

Re: Sugarphreak's H3T

Post by Sugarphreak »

Just brokered a BIG package of H3T parts into Canada today..... <img src='http://www.canadianhummerclub.com/forum ... iggrin.gif' class='bbc_emoticon' alt=':D' />
Top
User avatar
JL
CHC Trail Guide
Posts: 889
Joined: Thu Jan 28, 2010 11:26 am

Re: Sugarphreak's H3T

Post by JL »

OMG! Pics dude, lots of pics!!!!!!!!!!!!
[center]2006 H2 - Couple goodies but basically stock!

[/center]
Top
Post Reply

Return to “Hummer H3 and H3T”