Page 1 of 2

Can U Help

Posted: Mon May 03, 2010 9:44 pm
by Brian
Hi Folks just a slight problem with one of my h3s <img src='http://www.canadianhummerclub.com/forum ... on_eek.gif' class='bbc_emoticon' alt=':shock:' /> 2006 i found that the moter was missing and was running rough in idle anyway we did the usual (my buddy is mec.for 27 years at his own shop Northtown Auto Service in Barrie) a shameless plug and speacking of plugs we put new ones in and did some other stuff,but to no avail.What we found out is that when you remove the air breather it runs lean <img src='http://www.canadianhummerclub.com/forum ... ey-013.gif' class='bbc_emoticon' alt=':wtf:' /> and when you put it back on it runs really rich <img src='http://www.canadianhummerclub.com/forum ... ey-013.gif' class='bbc_emoticon' alt=':wtf:' /> .it sets a lean code.Can anyone give me any ideas.Thanks .The Bear. <img src='http://www.canadianhummerclub.com/forum ... ngHead.gif' class='bbc_emoticon' alt=':banghead:' /> <img src='http://www.canadianhummerclub.com/forum ... ngHead.gif' class='bbc_emoticon' alt=':banghead:' /> <img src='http://www.canadianhummerclub.com/forum ... ngHead.gif' class='bbc_emoticon' alt=':banghead:' />

Re: Can U Help

Posted: Mon May 03, 2010 9:50 pm
by T.C.
[quote name='eyelvmyh3' date='03 May 2010 - 08:44 PM' timestamp='1272937463' post='16475']

Hi Folks just a slight problem with one of my h3s <img src='http://www.canadianhummerclub.com/forum ... on_eek.gif' class='bbc_emoticon' alt=':shock:' /> 2006 i found that the moter was missing and was running rough in idle anyway we did the usual (my buddy is mec.for 27 years at his own shop Northtown Auto Service in Barrie) a shameless plug and speacking of plugs we put new ones in and did some other stuff,but to no avail.What we found out is that when you remove the air breather it runs lean <img src='http://www.canadianhummerclub.com/forum ... ey-013.gif' class='bbc_emoticon' alt=':wtf:' /> and when you put it back on it runs really rich <img src='http://www.canadianhummerclub.com/forum ... ey-013.gif' class='bbc_emoticon' alt=':wtf:' /> .it sets a lean code.Can anyone give me any ideas.Thanks .The Bear. <img src='http://www.canadianhummerclub.com/forum ... ngHead.gif' class='bbc_emoticon' alt=':banghead:' /> <img src='http://www.canadianhummerclub.com/forum ... ngHead.gif' class='bbc_emoticon' alt=':banghead:' /> <img src='http://www.canadianhummerclub.com/forum ... ngHead.gif' class='bbc_emoticon' alt=':banghead:' />

[/quote]

SEND A PM TO KEVIN (POLARBEAR)

Re: Can U Help

Posted: Mon May 03, 2010 10:21 pm
by duncanpa
You could also try a PM to Olishooter....Steve at Master Mechanics.

Re: Can U Help

Posted: Mon May 03, 2010 11:55 pm
by Brian
Thanks guys.The Bear <img src='http://www.canadianhummerclub.com/forum ... ght_on.gif' class='bbc_emoticon' alt=':right_on:' />

Re: Can U Help

Posted: Tue May 04, 2010 12:55 am
by shotgun-cam
our Alpha H3 did similar but gave a code & check engine light wound up being burnt wires and Oxygen sensor failure truck ran ruff and even chugged, backfired and shook at a stop light going to Queensway

Re: Can U Help

Posted: Tue May 04, 2010 1:09 am
by Brian
[quote name='shotgun-cam' date='04 May 2010 - 12:55 AM' timestamp='1272948912' post='16488']

our Alpha H3 did similar but gave a code & check engine light wound up being burnt wires and Oxygen sensor failure truck ran ruff and even chugged, backfired and shook at a stop light going to Queensway

[/quote]

Thanks shotgun-cam i'll check the wires and i have orderd a oxygen sensor and will install tommorow morn and here's to hoping.Thanks again. <img src='http://www.canadianhummerclub.com/forum ... ght_on.gif' class='bbc_emoticon' alt=':right_on:' />

Re: Can U Help

Posted: Tue May 04, 2010 8:07 am
by dwaxman1
good luck bear!

Re: Can U Help

Posted: Tue May 04, 2010 8:30 am
by T.C.
keep us updated <img src='http://www.canadianhummerclub.com/forum ... ght_on.gif' class='bbc_emoticon' alt=':right_on:' />

Re: Can U Help

Posted: Tue May 04, 2010 9:26 am
by Brian
WILL DO <img src='http://www.canadianhummerclub.com/forum ... /wavey.gif' class='bbc_emoticon' alt=':wavey:' />

Re: Can U Help

Posted: Wed May 05, 2010 1:27 pm
by Brian
<img src='http://www.canadianhummerclub.com/forum ... /wavey.gif' class='bbc_emoticon' alt=':wavey:' /> High folks just a note to say i have fixed my run rough prob. turns out was a messed up coil in #2 cyl. due to corrosive crap, <img src='http://www.canadianhummerclub.com/forum ... #>/mad.gif' class='bbc_emoticon' alt=':mad:' /> now she runs like a hummer. <img src='http://www.canadianhummerclub.com/forum ... SMILEY.gif' class='bbc_emoticon' alt=':woot:' /> The Bear.





P.S. A big thanks to all that helped me, <img src='http://www.canadianhummerclub.com/forum ... ght_on.gif' class='bbc_emoticon' alt=':right_on:' /> your cheques are in the mail. <img src='http://www.canadianhummerclub.com/forum ... e_wink.gif' class='bbc_emoticon' alt=':wink:' /> <img src='http://www.canadianhummerclub.com/forum ... e_wink.gif' class='bbc_emoticon' alt=':wink:' />