Canadian Hummer Club Forums

[quote name='JBeattie' timestamp='1292768564' post='23792']

Ok I got my Hummer back yesterday got Tranny rebuilt but before she went in she wasn't going into 4low making the grinding noise <img src='http://www.canadianhummerclub.com/forum ... ngHead.gif' class='bbc_emoticon' alt=':banghead:' /> so is that because of the transfer case motor or is it the transfer case is screwed the poooooch??? Looking for a direction to start trouble shooooooting.Also when I hit the locker button it will not lock either 4x4 mode???



Merry Christmas



John



[/quote]

John...congratulations on getting the Hummer back. If you are still having problems with it going into 4 low and locking the diff....I would suggest sending a PM to Kevin (Polar Bear) as he is a good bet on knowing what is up or Steve at Master Mechanics (Olishooter) and Roy. Between those guys and a complete list of symptoms, they can probably figure it out.



Merry Christmas and Happy New Year

I think the rear locker will only engage in 4 Low. Will the transfer case shift from 4 Hi unlocked to 4 Hi locked? You also have to be in Neutral and less than 5km/h I think it is, to shift into 4 Lo. Can you hear anything moving/engaging when trying to engage 4 Lo? Hopefully it is just a loose wire or stiff linkage that is preventing it from engaging.

is this a push button 4x4 truck as a h2 hummer

if tranny was just removed and it worked before check your plugs on the servo motor make sure all pins are pushed in

could be faulty servo motor or yikes !!!! TRANSFER CASE FAILURE !!! hope this may help

merry christmas