Page 1 of 1

Wiring diagram for power windows, door locks

Posted: Fri Jan 01, 2016 8:53 am
by DerekCanuck
Hello,
 
Back from work and working on the 2000 wagon that had the slight overheating issue (LOL).
 
Was wondering if anyone has the wiring diagram for the doors.  I would like to try sending some 12v power to the window regulators to see if all the door mechanicals work.  Guess I could connect them into my 2002 wiring, but would prefer not to pull the panels off to access the plugs.
 
Also, I am doing a lot of research on line for parts to rebuild this unit.  There are some savings here an there.  Managed a good price on the left hand front cowl and some brake parts.
 
Currently looking at the window seals for all four doors.  I see from HPG the one piece Seal, Door Frame, Window part # 6014159 are about $200
 
Also looking at the seal belt line part # 6011776
 
Does anyone know if there is an interchange part for the window seals?  Right now looks to be about $300 USD/ door just in seals.  I am ok with that, but if I can find elsewhere, surely would appreciate the savings to put towards other necessary parts.
 
 

Re: Wiring diagram for power windows, door locks

Posted: Fri Jan 01, 2016 12:10 pm
by ddgermann
Try this. Most of the door parts are reasonable except the window seals. I ended up not changing mine otherwise they would be on the way to you now. They are expensive and I found no other options for them. I bought stuff from David, Lynch (Adv Acc), and Travis during my restoration. It pays to shop as there were big differences on prices at times. There's a windshield sale on at Lynch now for heated. 
 
Good luck
 
D
 
Doorwiring.pdf
AM General 1999-2000 Parts Manual.pdf
 
 
Door Harness1.jpg
Doorharness2.jpg

Re: Wiring diagram for power windows, door locks

Posted: Sat Jan 02, 2016 11:58 am
by DerekCanuck
Wiring diagram worked  great.  Purple positive, three wires to ground to fool the switch, regulator in rear left door working!  Now onto the other three.
 
Once I confirm the mechanicals work, then onto prep for paint.

Re: Wiring diagram for power windows, door locks

Posted: Thu Jan 07, 2016 9:25 pm
by DerekCanuck
Currently working on the Duramax, changing out sensors, wiring, fuel lines, injectors from the donor.
 
I am good to go on the wiring for the Duramax as I am using a complete 2005 GM harness.
 
I would like to keep the fuel selector valve and switches to allow use of both tanks.  Would anyone have the wiring diagram for the fuel system?

Re: Wiring diagram for power windows, door locks

Posted: Sun Jan 10, 2016 12:50 pm
by ddgermann
Here is what I have.
 
Try this. It should be what you need
 
2000 Fuel System 1.pdf
2000 Fuel system 2.pdf
 
D

Re: Wiring diagram for power windows, door locks

Posted: Tue Jan 12, 2016 11:23 pm
by DerekCanuck
Appreciate DDGermann