Page 3 of 5
Re: CUMMINS CONVERSION H1
Posted: Thu Feb 03, 2011 7:20 pm
by T.C.
[quote name='Heavyde' timestamp='1296425924' post='24789']
]
finally got the body on 2 inch body lift had plenty of room
had to knotch the steering hole threw cab a bit
just need my intercooler to arrive and button up the cooling system hopefully test drive next weekend
go through check list
all in all this conversion went well
hopefully get some feedback or spark some interest for someone who wants to do this to their hummer
[/quote]
I KNOW WHO TO CALL WHEN I DO MY HUMMER <img src='
http://www.canadianhummerclub.com/forum ... lleyes.gif' class='bbc_emoticon' alt=':rolleyes:' /> <img src='
http://www.canadianhummerclub.com/forum ... ght_on.gif' class='bbc_emoticon' alt=':right_on:' />
Re: CUMMINS CONVERSION H1
Posted: Thu Feb 03, 2011 11:53 pm
by Darcy
yup killer dowel is fixed very easy to do with engine out LOL
Re: CUMMINS CONVERSION H1
Posted: Thu Feb 03, 2011 11:57 pm
by Darcy
thanx man kinda using mine as a guinea pig for the cummins all went great though
beefed up the steering box area were they tend to crack
installed new rad while apart
just finishing up the electrical side of things now
Re: CUMMINS CONVERSION H1
Posted: Fri Feb 04, 2011 10:38 am
by tylerlisk
[quote name='Heavyde' timestamp='1296795450' post='24901']
thanx man kinda using mine as a guinea pig for the cummins all went great though
beefed up the steering box area were they tend to crack
installed new rad while apart
just finishing up the electrical side of things now
[/quote]
Wow! This is crazy! Well done, cant wait to see it when its all done.
Re: CUMMINS CONVERSION H1
Posted: Sat Feb 05, 2011 12:44 am
by Darcy
two yellow tops all wired with 3 odd a little overkill but it will last
converted the stock alternator to a single wire setup
used all hummer senders for the gauges
push button to a ford relay to run the grid and fuel heater
just need my intercooler to arrive and go play lol
waiting on flex a lite cooling fans one puller and two pushers sshould be plenty
Re: CUMMINS CONVERSION H1
Posted: Fri Feb 11, 2011 6:53 pm
by Darcy
got my intercooler yesterday had to fab up custom lines
got the dual electric fans set up inside the plenum
truck is ready for a rip this week
just touching up on the interior getting the speedo and other gauges set up
Re: CUMMINS CONVERSION H1
Posted: Sat Feb 12, 2011 10:22 pm
by Tom
Looking good! Let me know when its ready for a shotgun joy ride!
Re: CUMMINS CONVERSION H1
Posted: Sun Feb 13, 2011 8:46 am
by Darcy
just doing touching up cleaning up some wiring i ended up with an extra intercooler
if it fits yours let me know
or if you need a spare
Re: CUMMINS CONVERSION H1
Posted: Mon Feb 14, 2011 12:58 pm
by dwaxman1
wow.. a spare intercooler....nice...
Re: CUMMINS CONVERSION H1
Posted: Tue Feb 15, 2011 1:58 am
by Tom
[quote name='Heavyde' timestamp='1297604815' post='25123']
just doing touching up cleaning up some wiring i ended up with an extra intercooler
if it fits yours let me know
or if you need a spare
[/quote]
If it's bigger than my existing one, I will buy it from you. I was asking before as I was considering putting in a bigger one.