Had a line rupture.
Looking at replacing all of them with a pre bent SS kit. Similar to https://www.summitracing.com/parts/cst-hr1001sb-ss/make/hummer/model/h2
Does anyone here have any advice/tips to offer before I get into this job?
Brake line replacement
- Big_Dub
- CHC Pilot
- Posts: 131
- Joined: Mon Mar 15, 2010 1:47 pm
Brake line replacement
Last edited by Big_Dub on Thu Jan 30, 2020 12:36 pm, edited 1 time in total.
- Injunfarian
- CHC President
- Posts: 242
- Joined: Sun Feb 21, 2010 12:11 pm
- Location: Lambton Shores, ON
- Contact:
Re: Brake line replacement
Usually with brake lines my #1 recommendation is don't forget the nut before you do the flare lol.. However in this case you don't need to worry about it.
I am not sure how they are on the H2 but with other vehicles I would recommend sourcing out some line hangers/hardware just incase any are too rusted out to use or get damaged during removal.
I am not sure how they are on the H2 but with other vehicles I would recommend sourcing out some line hangers/hardware just incase any are too rusted out to use or get damaged during removal.
- Big_Dub
- CHC Pilot
- Posts: 131
- Joined: Mon Mar 15, 2010 1:47 pm
Re: Brake line replacement
Thanks Injunfarian. Ill have that end of it covered as well. And yes most annoying thing is forgetting the nut before making the flare haha
I have read that people are having to loosen/ remove the body bolts and raising the body off of the frame in order to gain access to the brake control module, Was wondering if anyone had experience with this issue.
I have read that people are having to loosen/ remove the body bolts and raising the body off of the frame in order to gain access to the brake control module, Was wondering if anyone had experience with this issue.
- Roy
- CHC Trail SuperGuide
- Posts: 1933
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Re: Brake line replacement
May want to pm Kevin..Polar bear, hummer mechanic and H2 specialty mods
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761
<p style="text-align:center;">