Canadian Hummer Club Forums

What have you done to your Truck, either by choice or because you had to??



For example..My list seems a bit long but...

• Gibson Side Swept exhaust (completely skid plated so Tail Pipe does not pop off ;-) )
• Gibson Headers
• Airraid Air intake
• Airraid Throttle Body spacer
• Warn 10,000lbs Winch and Warn Custom Front Bumper
• Gobi Full Roof Rack
• New Torsion Keys to lift front end
• Goodyear 37s MTR
• Windows Tinted
• Phillips 9007 HIDs
• RubberDuck 4x4 Full Under Body Protection
• compustar Remote Starter and Alarm ( alarmed worked when they tried to sell it a couple of times)

I am for sure missing stuff... this is why I am called Modzilla I guess <img src='http://www.canadianhummerclub.com/forum ... _ugeek.gif' class='bbc_emoticon' alt=':ugeek:' /> <img src='http://www.canadianhummerclub.com/forum ... _ugeek.gif' class='bbc_emoticon' alt=':ugeek:' />



I have not even mentioned all the Warranty work that was done so far.. Steve will have to help me with that list.. I think I have had three pitman arm changes, a couple of idler arms, water pump, steering shock, and a bunch of other stuff.. the extended GM warranty has done well for me! I Highly recommend it!!

No one done any MODS on their trucks?? I am surprised....

I HAVE A H1 CAN I POST <img src='http://www.canadianhummerclub.com/forum ... _smile.gif' class='bbc_emoticon' alt='' />

go ahead TONY.. you remember what you have done??

Okay, nothing like Derek, but I have a few new items to put on the Hummer. I have an Airaid cold Air Intake with a Poweraid Throttle Body Spacer. I purchased some Invision DVD Headrests for entertaining the kids on long trips and the Xbox is next. Some chrome here and there and that is about it.

[quote name='dwaxman1' date='14 February 2010 - 01:02 PM' timestamp='1266170576' post='1370']

go ahead TONY.. you remember what you have done??

[/quote]





i have to call KEVIN AND RUBBER DUCK <img src='http://www.canadianhummerclub.com/forum ... feSpit.gif' class='bbc_emoticon' alt=':coffeespit:' />

it is a long list.. I thought of ten more items just now..

This list could get long winded but I will give it a shot.



-Custom 2inch suspension lift front a rear with factory air ride still functional

-Boulder Accessories Winch bumper with 9500lb Mile Marker Winch

-Relocated winch control plug to drivers side air box

-Interior winch controls for easy self recovery

-Custom mounted in dash CB Radio and factory looking CB antenna mount.

-Rubberduck Treehugger brush guard--The only one on a H2 in the world for the time beeing lol.

-Eaton E-locker in the front Diff

-Fabtech tie rods

-37 inch Toyo Open Country M/T's

-18 inch Mazzi wheels--time for new ones these are getting a bit of trail rash.

-Modded factory rock rails to extend out from the body 1 1/2 inches

-LE side steps

-XTC low profile light bar

-Limb risers

-Boulder accessories roof rack with mounted ammo cans (painted satin black to match rack) for recovery gear storage

-360 Degree Permiter lighting on roof rack.

-Custom mounted tool box stocked full of tools for the trail. This is located in the rear of the truck in the driver side window sill. I built a shelf out of the factory interior tire carrier.



I know I a missing some stuff but here is what is to come next.



-Staun internal beadlocks

-Rubberduck undercarriage protection.

-cognito front upper control arms. Then I can go 3 inches higher than factory in the front.

-New Shocks--not sure which brand yet.

-Rear winch bumper---Need to get Rubberduck to develop it just like I did the H2 Treehugger lol. If anyone else is seriously interested in this and willing to put $$$ down as a commitment on it email me.

[quote name='humminnboatin' date='22 February 2010 - 12:52 PM' timestamp='1266861151' post='1925']

This list could get long winded but I will give it a shot.



-Custom 2inch suspension lift front a rear with factory air ride still functional

-Boulder Accessories Winch bumper with 9500lb Mile Marker Winch

-Relocated winch control plug to drivers side air box

-Interior winch controls for easy self recovery

-Custom mounted in dash CB Radio and factory looking CB antenna mount.

-Rubberduck Treehugger brush guard--The only one on a H2 in the world for the time beeing lol.

-Eaton E-locker in the front Diff

-Fabtech tie rods

-37 inch Toyo Open Country M/T's

-18 inch Mazzi wheels--time for new ones these are getting a bit of trail rash.

-Modded factory rock rails to extend out from the body 1 1/2 inches

-LE side steps

-XTC low profile light bar

-Limb risers

-Boulder accessories roof rack with mounted ammo cans (painted satin black to match rack) for recovery gear storage

-360 Degree Permiter lighting on roof rack.

-Custom mounted tool box stocked full of tools for the trail. This is located in the rear of the truck in the driver side window sill. I built a shelf out of the factory interior tire carrier.



I know I a missing some stuff but here is what is to come next.



-Staun internal beadlocks

-Rubberduck undercarriage protection.

-cognito front upper control arms. Then I can go 3 inches higher than factory in the front.

-New Shocks--not sure which brand yet.

-Rear winch bumper---Need to get Rubberduck to develop it just like I did the H2 Treehugger lol. If anyone else is seriously interested in this and willing to put $$$ down as a commitment on it email me.

[/quote]





WOW BRO NICE <img src='http://www.canadianhummerclub.com/forum ... ght_on.gif' class='bbc_emoticon' alt=':right_on:' />

BY THE WAY IF YOU NEED THE STAUN BEADLOCKS....LET ME KNOW ...I HAVE THEM IN STOCK!

THAT TREEHUGGER FROM RUBBER DUCK NICEEEEEEEEEEEEEEEE <img src='http://www.canadianhummerclub.com/forum ... ght_on.gif' class='bbc_emoticon' alt=':right_on:' />

TC.. I need Beadlocks!!