Canadian Hummer Club Forums

I saved this shot from sometime back, I think from one of your runs up there. Can someone help me contact this owner to get some info on that bumper? I have that winch but need to change my front end to get rid of that plastic junk!

Have you checked out the ARB bumper? TC can hook you up! <img src='http://www.canadianhummerclub.com/forum ... ght_on.gif' class='bbc_emoticon' alt=':right_on:' />



If I was to do it all over again I would have gone this route... that or the Defelice.

[quote name='Sugarphreak' timestamp='1288884371' post='22523']

Have you checked out the ARB bumper? TC can hook you up! <img src='http://www.canadianhummerclub.com/forum ... ght_on.gif' class='bbc_emoticon' alt=':right_on:' />



If I was to do it all over again I would have gone this route... that or the Defelice.





[/quote]



Are you the guy I sent some skids to at a resort in the US for a wheeling trip?

I really like my winch out in the open. I have winched for many years (since the 60's) and have seen the snarffle concealed winches can have or submerged problems in mud. We got gumbo mud down here. I like the ARB I just want a little different mount for the winch. I also like my power plant winch which needs to be exposed.

I may have to come up with something like just the winglets on the outer edges and a flat verticle piece across the middle. Then use incorporate what I have. Maybe someday? I think that might be the Tough Country bumper.

[quote name='Hunner' timestamp='1288886436' post='22524']

Are you the guy I sent some skids to at a resort in the US for a wheeling trip?[/quote]



<img src='http://www.canadianhummerclub.com/forum ... #>/huh.gif' class='bbc_emoticon' alt=':huh:' />



Nope, I think you have the wrong guy!

Hey our ARB bumper works fine with a T-Max winch our problem was the T-Max control box corroded due to bad paint. winch stays clean due to ports on sides.winch sides can be reached thru two large oval holes behind our hella lamps in fact the only holes drilled were for the winch control. Also the bumper has a flat surface allowing the setting down of controller ,shakles pins or other equipement during towing set ups.



The small marker signal lamps are included the fogs are optional

[quote name='Hunner' timestamp='1288883835' post='22522']

Can someone help me contact this owner to get some info on that bumper? I have that winch but need to change my front end to get rid of that plastic junk![/quote]





Hunner, that H3 belongs to Yanni (YAT74 on CHO). That's a Tough Country bumper.

[quote name='Hunner' timestamp='1288886436' post='22524']





[/quote]



Great looking H3, need some shots from different angles...

HI guys, I sure like that ARB bumper on red hummer pic, I take it from some of the posts you are pretty happy with. I like the way the winch is kinda hidden. Quick question, is it a pretty easy bumper to install?

[quote name='Copperhead' timestamp='1292807661' post='23799']

HI guys, I sure like that ARB bumper on red hummer pic, I take it from some of the posts you are pretty happy with. I like the way the winch is kinda hidden. Quick question, is it a pretty easy bumper to install?

[/quote]

If you are handy ,should take you 2 to 3 hours ...just to let you know the ARBbumper comes in black....you will need to paint it if you want the look of the red one...need more info let me know tc@arbcanada.com we have them in stock front and back bumper cheers

[quote name='T.C.' timestamp='1292864616' post='23814']

If you are handy ,should take you 2 to 3 hours ...just to let you know the ARBbumper comes in black....you will need to paint it if you want the look of the red one...need more info let me know tc@arbcanda.com we have them in stock front and back bumper cheers

[/quote]



Correction of email.....

tc@arbcanada.com



You'd think he could get the email address



Merry Christmas All! Drink lots and drive none. <img src='http://www.canadianhummerclub.com/forum ... tongue.gif' class='bbc_emoticon' alt=':P' /> <img src='http://www.canadianhummerclub.com/forum ... >/cool.gif' class='bbc_emoticon' alt='8)' />