I was thinking they were what I would call spider gears in the diffs. But that I would think would be like 3 small ones and 1 large one per diff?
Close?
Time for knowledge
- Roy
- CHC Trail SuperGuide
- Posts: 1933
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Re: Time for knowledge
Nice guess.
If it was a regular diff, there would be 2 spider and 2 side gears all at about a 45' gear cut.
This is a special application for the torson 1 diffs. It is similiar to a old Toyota diff.
This diff has 3 side gears and one centre gear per axle shaft. Model year up to including 98.
Once the BTM has been used a lot, the gears wear and will give a problem similiar to brake chatter.
If it was a regular diff, there would be 2 spider and 2 side gears all at about a 45' gear cut.
This is a special application for the torson 1 diffs. It is similiar to a old Toyota diff.
This diff has 3 side gears and one centre gear per axle shaft. Model year up to including 98.
Once the BTM has been used a lot, the gears wear and will give a problem similiar to brake chatter.
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761
<p style="text-align:center;"> - Monk
- CHC Trail SuperGuide
- Posts: 1232
- Joined: Mon Oct 01, 2012 10:36 am
- Location: Ontario
Re: Time for knowledge
I'm assuming that's not metal in the bottom of that diff? If so ouch!!
I've never seen that set up, learn something new everyday
I've never seen that set up, learn something new everyday
96 HMC4
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
- Rocrusher
- CHC Pilot
- Posts: 107
- Joined: Sun Mar 05, 2017 4:42 pm
Re: Time for knowledge
Thats cool.
So what would be in my 2000? Did they go to normal spider gears?
So what would be in my 2000? Did they go to normal spider gears?
- Roy
- CHC Trail SuperGuide
- Posts: 1933
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Re: Time for knowledge
99-01 have torson 2 , Again , not your standard diff.
Please correct me if this is not the design
Please correct me if this is not the design
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761
<p style="text-align:center;"> - Rocrusher
- CHC Pilot
- Posts: 107
- Joined: Sun Mar 05, 2017 4:42 pm
Re: Time for knowledge
Interesting. May need to dive into one soon just to learn.doing a complete front brake job this weekend. May have to open that up and clean up and re lube.