Page 1 of 1

Hummer Trivia Question #2

Posted: Sun Nov 09, 2008 8:50 pm
by whitehumh2
So here we go with question #2:



Remeber the rules are:



Rules:  #1.To Answer a question you must send me a PM with your answer to the question.

          #2. The Question will be posted for 6 days and then the answer revealed along with who got it right on Sunday, just before the next question gets posted.

          #3. Scoring works as follows: 5 points for the first correct answer. 4 points for every other correct answer. And 1 point if only some of the info is right. I will keep score and the tally will be posted every week with the answer so that everyone knows who is leading and who is close to taking the lead.





Are you ready??? Then Here we go!



On the prototype H2 (the one they should've made), several attributes closely followed the H1 but sadly never made it into production. Had they made it, the H2 would've been the ultimate force to be reckoned with on-road and off-road. Excluding luxury items and interior refinements list 4 standard or optional features that were considered for production, that would've enhanced and set the H2 apart in the off-road marketplace. <img src='http://www.canadianhummerclub.com/forum ... >/ohmy.gif' class='bbc_emoticon' alt=':o' /> <img src='http://www.canadianhummerclub.com/forum ... >/ohmy.gif' class='bbc_emoticon' alt=':o' /> <img src='http://www.canadianhummerclub.com/forum ... >/ohmy.gif' class='bbc_emoticon' alt=':o' /> <img src='http://www.canadianhummerclub.com/forum ... >/ohmy.gif' class='bbc_emoticon' alt=':o' />



Good Luck!



Since this info maybe a little harder to find I will give you two weeks before I post the answer!!! <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' />



Kev

Re: Hummer Trivia Question #2

Posted: Tue Nov 25, 2008 7:15 am
by Roy
must be a tough one, have not posted answer yet. Got me on this one.....

Re: Hummer Trivia Question #2

Posted: Tue Nov 25, 2008 7:34 am
by dwaxman1
again... I am stumped!!!



Thanks for making me feel dumb Kev!!

Re: Hummer Trivia Question #2

Posted: Tue Nov 25, 2008 6:34 pm
by T.C.
h2  <img src='http://www.canadianhummerclub.com/forum ... lleyes.gif' class='bbc_emoticon' alt='::)' /> <img src='http://www.canadianhummerclub.com/forum ... lleyes.gif' class='bbc_emoticon' alt='::)' /> <img src='http://www.canadianhummerclub.com/forum ... lleyes.gif' class='bbc_emoticon' alt='::)' /> sorry i drive a H1 <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... iggrin.gif' class='bbc_emoticon' alt=':D' /> <img src='http://www.canadianhummerclub.com/forum ... iggrin.gif' class='bbc_emoticon' alt=':D' /> <img src='http://www.canadianhummerclub.com/forum ... >/wink.gif' class='bbc_emoticon' alt=';)' />

Re: Hummer Trivia Question #2

Posted: Wed Nov 26, 2008 9:40 am
by dwaxman1
Of course Tony.. we all know and well do the State troopers too... <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' />

Re: Hummer Trivia Question #2

Posted: Wed Nov 26, 2008 10:14 pm
by T.C.
GOOD ONE BROOOOO <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... iggrin.gif' class='bbc_emoticon' alt=':D' />  1...ZERO FOR YOU <img src='http://www.canadianhummerclub.com/forum ... /angry.gif' class='bbc_emoticon' alt='>:(' /> <img src='http://www.canadianhummerclub.com/forum ... >/wink.gif' class='bbc_emoticon' alt=';)' />

Re: Hummer Trivia Question #2

Posted: Fri Dec 05, 2008 9:09 pm
by Roy
Kev, anyone get this one part, or all right. Ran out of time searching other info. <img src='http://www.canadianhummerclub.com/forum ... >/cool.gif' class='bbc_emoticon' alt='8)' /> <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' />

Next.

Re: Hummer Trivia Question #2

Posted: Sun Dec 07, 2008 8:31 am
by whitehumh2
Ok the Loooooonnnnnnggggg awaited answer! Sorry for the delay but work got in the way. So the here it is!



The 4 things that I was looking for were:



1. Front and Rear independent suspension...would've made a huge difference for clearance...as all you H1 owners know! <img src='http://www.canadianhummerclub.com/forum ... lleyes.gif' class='bbc_emoticon' alt='::)' />



2. Full Front Bumper to Rear Bumper Skidplating using solid steel plate from frame rail to frame rail, not the ladder style of the H1, imagine mud holes with a smooth belly! You'd never get stuck.... well maybe never! <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' />



3. Front Bumper Mounted Intergrated 12000lbs Winch...would've been nice to have had this from the factory since it would not affect approach angle, etc. :'(



4. Last but definitely not least, CTIS was supposed to be an available option! The prototype 19" mags had provision for the air lines and already had beadlocks. Thanks to the IFS and IRS it was going to be completely possible although quite different from the H1s CTIS design, since the H2 would not have geared hubs! <img src='http://www.canadianhummerclub.com/forum ... >/ohmy.gif' class='bbc_emoticon' alt=':o' /> <img src='http://www.canadianhummerclub.com/forum ... >/ohmy.gif' class='bbc_emoticon' alt=':o' />

Re: Hummer Trivia Question #2

Posted: Sun Dec 07, 2008 8:36 am
by whitehumh2
Oh, and the winners this round:



Norm was the first to answer but missing some info so 4 points!



Dave was the next to answer but as well missing some info so 3 points!



Since this one was so hard I gave you both more points!!!



Congrats! And get ready for Question #3! <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' /> <img src='http://www.canadianhummerclub.com/forum ... >/grin.gif' class='bbc_emoticon' alt=';D' />



Kev