Air compressor + high impact wrench setup for Offroad

Open to the public and everyone to view, a general area to just chat about anything...
Post Reply
User avatar
yevych
CHC Pilot
Posts: 216
Joined: Thu Mar 04, 2010 1:35 pm
Location: Toronto
Contact:

Air compressor + high impact wrench setup for Offroad

Post by yevych »

Apology if this is wrong place to place this ....
 
Looking for suggestions for Reliable, Not-too-expensive, Portable  12V air compressor + high impact wrench setup. Hopefully it is not going to be used often, so don't want to spend too much on it...
2010 H3 Adventure 3.7L - Hummer evolution :), 35" Mickey Thomson MTZ on 16" MT SideBiters, oem underbody & rocker protection, Safari snorkle, K&N filters, Air Doc intake, Rola roof rack, Off-road lights, Runva winch on High-Mount and Warn on tray, Outfitter heavy duty tie rods.
User avatar
Roy
CHC Trail SuperGuide
Posts: 1926
Joined: Tue Dec 29, 2009 8:21 pm
Location: Stratford,Ontario

Re: Air compressor + high impact wrench setup for Offroad

Post by Roy »

Dewalt has a reliable 1/2 impact. It has worked for the H1 tires,just have to remember to charge after use for the next day .
Snap on ..well, tooo expensive but good. battery does not last long.
I have a nerw dewalt gun + charger, but no batteries,if interested, I will get you a price
                                      99 Wagon
                          5.9 Cummins 12 valve  mech.                                     Stocking most parts to fix your H1  :smil9:
                                   41.5-13.5 R16.5 Pitbull Rockers,
                                     Auburn lockers front and rear
                                  Full custom underbody protection
                                                3" body lift
                                          4" side rock tubes                                 
                               12100 rear cv shafts                                                                        
 
 
 
 
519-272-1761   :cellphone:
<p style="text-align:center;"> 
User avatar
yevych
CHC Pilot
Posts: 216
Joined: Thu Mar 04, 2010 1:35 pm
Location: Toronto
Contact:

Re: Air compressor + high impact wrench setup for Offroad

Post by yevych »

Thanks Roy, let me do a bit more research and I'll let you know ... don't want to spend tooo much :-)
2010 H3 Adventure 3.7L - Hummer evolution :), 35" Mickey Thomson MTZ on 16" MT SideBiters, oem underbody & rocker protection, Safari snorkle, K&N filters, Air Doc intake, Rola roof rack, Off-road lights, Runva winch on High-Mount and Warn on tray, Outfitter heavy duty tie rods.
User avatar
whitehumh2
CHC Trail SuperGuide
Posts: 4529
Joined: Tue Jul 04, 2006 11:47 pm
Location: Lachine, Quebec

Re: Air compressor + high impact wrench setup for Offroad

Post by whitehumh2 »

The best would be an under hood engine driven compressor set-up like one from Kilby entreprises.
 
There are a couple of companies that make bolt on kits for our LS engines.
 
Another possibility would be an ARB dual compressor with an air tank, this is my current set-up but I will be upgrading to the engine driven one soon!
 
Extreme Outback also makes amazing air compressors both electric and engine driven!
Last edited by whitehumh2 on Sat Jul 04, 2015 9:12 am, edited 1 time in total.
<p class="bbc_center">1 - There is a time for everything,

and a season for every activity under the heavens:

3b - a time to tear down and a time to build,

5 - a time to scatter stones and a time to gather them,

Ecclesiastes 3:1,3b&5a
User avatar
Sub
CHC Trail SuperGuide
Posts: 1142
Joined: Sat Feb 05, 2011 10:52 am

Re: Air compressor + high impact wrench setup for Offroad

Post by Sub »

You See Kevin ,  Michael wants to run a quick air system so you don't have to sit for 30 min airing the tires back as well. as well as do small applications on power tools as well. Am I right Mike?
-04 HUMMER H1 HMCO Optimizer 6.5 Black
-94 HUMMER XLC2 6.5L N/A 10K Miles ONLY
-95 HUMMER H1 AMBL/CONVERSION WAGON
-85 M998 6.2L X DOORS 32K Miles
-03 HUMMER H1 White wagon/28" Pirelli's
User avatar
whitehumh2
CHC Trail SuperGuide
Posts: 4529
Joined: Tue Jul 04, 2006 11:47 pm
Location: Lachine, Quebec

Re: Air compressor + high impact wrench setup for Offroad

Post by whitehumh2 »

I know, that is why I suggested the parts I did!

There is nothing faster than an engine driven compressor...which is why I will be changing to that soon myself!
<p class="bbc_center">1 - There is a time for everything,

and a season for every activity under the heavens:

3b - a time to tear down and a time to build,

5 - a time to scatter stones and a time to gather them,

Ecclesiastes 3:1,3b&5a
User avatar
yevych
CHC Pilot
Posts: 216
Joined: Thu Mar 04, 2010 1:35 pm
Location: Toronto
Contact:

Re: Air compressor + high impact wrench setup for Offroad

Post by yevych »

[quote="Sub"]
You See Kevin ,  Michael wants to run a quick air system so you don't have to sit for 30 min airing the tires back as well. as well as do small applications on power tools as well. Am I right Mike?
[/quote]
 
Yeap, thinking to use it for tires and tools
2010 H3 Adventure 3.7L - Hummer evolution :), 35" Mickey Thomson MTZ on 16" MT SideBiters, oem underbody & rocker protection, Safari snorkle, K&N filters, Air Doc intake, Rola roof rack, Off-road lights, Runva winch on High-Mount and Warn on tray, Outfitter heavy duty tie rods.
Post Reply