Canadian Hummer Club Forums

Contact Roys, he can probably get you some parts!



Kev

[quote name='dadshumm' date='19 July 2010 - 07:08 PM' timestamp='1279580912' post='19507']

i need for a H1 breaks, roters, clutch pan, front and rear coils and shocks, also factory rims and some tires. run flats for sure.anyone got a line on that sort of stuff?

[/quote]



Why would you want run flats?

They are problematic, make tire changes tough, and personally if they were on my truck I would take them off and discard them.

Oh yeah, that's right, I did do that.



Unless, of course, you are planning to go to a war zone.



Beadlocks are a different story.



Just asking.

have a set of runflats.



I believe Roy at www.crazycanucks4x4.com will hdoes have all the rest...and maybe even a set of runflats too...



if not www.hummerpartsguy.com has all of it..

[quote name='dwaxman1' date='19 July 2010 - 09:24 PM' timestamp='1279589056' post='19510']

have a set of runflats.



I believe Roy at www.crazycanucks4x4.com will hdoes have all the rest...and maybe even a set of runflats too...



if not www.hummerpartsguy.com has all of it..

[/quote]



I came across this on eBay, and it's worth a look if you need a laugh:



2 Piece Runflat



Alan

[quote name='dadshumm' date='20 July 2010 - 12:25 PM' timestamp='1279643149' post='19531']

i got a set of beadlocks on their now but just a set of cheep all terain tires. looking for something with a little more meat and grip for the trails.would like the run flats just for the reason i dont have a spare rim or tire to go with my ctis system. figured that would be a better way.also would like the original rims because they got the ctis protective cover on the rims.

[/quote]



That's not a good solution.



You should know that if you go flat in a tire, and depend on the run-flats to get you any distance, you will destroy the tire.

The military doesn't care. Someone may be shooting at them.



Much better to get a spare rim and tire.

[quote name='dadshumm' date='19 July 2010 - 07:08 PM' timestamp='1279580912' post='19507']

i need for a H1 breaks, roters, clutch pan, front and rear coils and shocks, also factory rims and some tires. run flats for shure.anyone got a line on that sort of stuff?

[/quote]



Yes ,I do have all in stock except, tires and rims, But I know where to find a set of 16.5 split rims w/GSA at 30-40% tread.

[quote name='dadshumm' date='22 July 2010 - 02:24 PM' timestamp='1279823071' post='19596']

sounds good. what would that run me?

[/quote]



Check out my site for all the individual parts, Tires and rims, have to verify,but around the $600.

As stated earlier, I have all your parts needed in stock. <img src='http://www.canadianhummerclub.com/forum ... /wavey.gif' class='bbc_emoticon' alt=':wavey:' /> <img src='http://www.canadianhummerclub.com/forum ... /wavey.gif' class='bbc_emoticon' alt=':wavey:' />