Need the entire front differential assembly for my 2008 H3 - 5 cylinder.
Just lost the stock aluminum housing, 4.56 gears, wit no locker so need immediate replacement. Will consider Alpha cast iron housing or 4.56 with e-locker if price is reasonable. Also need gears if going with the cast iron housing, just to get things figure out before buying does anyone know a good source?
The sooner I can get one the better! New or used, no reasonable offer refused.
WANTED: H3 Front Differential
- JL
- CHC Trail Guide
- Posts: 889
- Joined: Thu Jan 28, 2010 11:26 am
WANTED: H3 Front Differential
[center]2006 H2 - Couple goodies but basically stock!
[/center]
[/center]
- Khamul
- CHC Pilot
- Posts: 354
- Joined: Sun Jun 21, 2009 12:52 pm
- Location: Calgary
- Contact:
Re: WANTED: H3 Front Differential
I can't find anything online..... give Rick a call at E-Mortal and see if he has some ideas or Will as he's the parts guy!
Live life like there is no tomorrow!! You never know what's around the next corner.....
- shotgun-cam
- CHC Trail SuperGuide
- Posts: 2037
- Joined: Sun Jan 24, 2010 2:09 pm
Re: WANTED: H3 Front Differential
Jl sorry to say this is dealer country most wrecks are bought here by dealers even before they hit the wrecking yards. As for replacement Can you wave waranty under dealers nose ( if you can't get it covered you may get a bill split on it. I take you destroied the case only if not check the Transfer case as usually Rhino destroies both at the same time ( 08 H3 Alpha). Also check in with TC as ARB lockers have replacement cases as well I Think.
Enjoy Life and Leave the World a Little Better Each Day!!
- Roy
- CHC Trail SuperGuide
- Posts: 1926
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Re: WANTED: H3 Front Differential
[quote name='JL' timestamp='1297821371' post='25177']
Need the entire front differential assembly for my 2008 H3 - 5 cylinder.
Just lost the stock aluminum housing, 4.56 gears, wit no locker so need immediate replacement. Will consider Alpha cast iron housing or 4.56 with e-locker if price is reasonable. Also need gears if going with the cast iron housing, just to get things figure out before buying does anyone know a good source?
The sooner I can get one the better! New or used, no reasonable offer refused.
[/quote]
See if this will work......
http://www.gmpartsdirect.com
GM PART # 15920599
CATEGORY: Differential Carrier
PACK QTY: 1
CORE CHARGE: $0.00
GM LIST: $546.61
OUR PRICE: $317.80
http://www.allworldautomotive.com/featu ... 0524564371
Also....
http://www.sax-express.com/
read please..
http://www.hummerxclub.com/forum/viewto ... 82&start=0
http://www.hummerforums.com/forum/showt ... hp?t=19083
All up to you now...
Need the entire front differential assembly for my 2008 H3 - 5 cylinder.
Just lost the stock aluminum housing, 4.56 gears, wit no locker so need immediate replacement. Will consider Alpha cast iron housing or 4.56 with e-locker if price is reasonable. Also need gears if going with the cast iron housing, just to get things figure out before buying does anyone know a good source?
The sooner I can get one the better! New or used, no reasonable offer refused.
[/quote]
See if this will work......
http://www.gmpartsdirect.com
GM PART # 15920599
CATEGORY: Differential Carrier
PACK QTY: 1
CORE CHARGE: $0.00
GM LIST: $546.61
OUR PRICE: $317.80
http://www.allworldautomotive.com/featu ... 0524564371
Also....
http://www.sax-express.com/
read please..
http://www.hummerxclub.com/forum/viewto ... 82&start=0
http://www.hummerforums.com/forum/showt ... hp?t=19083
All up to you now...
Last edited by Roy on Wed Feb 16, 2011 8:39 am, edited 1 time in total.
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761 
<p style="text-align:center;"> 
- Khamul
- CHC Pilot
- Posts: 354
- Joined: Sun Jun 21, 2009 12:52 pm
- Location: Calgary
- Contact:
Re: WANTED: H3 Front Differential
[quote name='Roy' timestamp='1297859254' post='25194']
See if this will work......
http://www.gmpartsdirect.com
GM PART # 15920599
CATEGORY: Differential Carrier
PACK QTY: 1
CORE CHARGE: $0.00
GM LIST: $546.61
OUR PRICE: $317.80
http://www.allworlda...id=330524564371
Also....
http://www.sax-express.com/
read please..
http://www.hummerxcl...&t=7182&start=0
http://www.hummerfor...ead.php?t=19083
All up to you now...
[/quote]
U guys rock!!! <img src='http://www.canadianhummerclub.com/forum ... ght_on.gif' class='bbc_emoticon' alt=':right_on:' />
See if this will work......
http://www.gmpartsdirect.com
GM PART # 15920599
CATEGORY: Differential Carrier
PACK QTY: 1
CORE CHARGE: $0.00
GM LIST: $546.61
OUR PRICE: $317.80
http://www.allworlda...id=330524564371
Also....
http://www.sax-express.com/
read please..
http://www.hummerxcl...&t=7182&start=0
http://www.hummerfor...ead.php?t=19083
All up to you now...
[/quote]
U guys rock!!! <img src='http://www.canadianhummerclub.com/forum ... ght_on.gif' class='bbc_emoticon' alt=':right_on:' />
Live life like there is no tomorrow!! You never know what's around the next corner.....
- JL
- CHC Trail Guide
- Posts: 889
- Joined: Thu Jan 28, 2010 11:26 am
Re: WANTED: H3 Front Differential
Thanks for the links Roy! Much appreciated!
[center]2006 H2 - Couple goodies but basically stock!
[/center]
[/center]
- Roy
- CHC Trail SuperGuide
- Posts: 1926
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Re: WANTED: H3 Front Differential
Just have to get it up past the border now.I think the ebay unit will cost less because the others may need every individual pieces ordered.Hope i am wrong to help your pocket book.
Last edited by Roy on Thu Feb 17, 2011 3:23 pm, edited 1 time in total.
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761 
<p style="text-align:center;"> 