----------2 Possible/ probable dates-----------
I know they are long weekends,but whom has a life anyway.
July 2 and July 30
9am- 4pm or so
2 hoist are available ,most tools and general knowledge.
Hoist schedule are to be arranged on what has to be done.
Once I get my wreck out of the one hoist.
No machining of custom parts... just repairs and replacements of parts.
Most H1 parts are available here.
Possible BBQ and refreshments from sponsors...to be confirmed.
Please contact me in advance for parts and scheduling
post here if interested and which dates,eta ish, repairs to be done.....
Wrenching Party !
- Roy
- CHC Trail SuperGuide
- Posts: 1933
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Wrenching Party !
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761
<p style="text-align:center;"> - Monk
- CHC Trail SuperGuide
- Posts: 1232
- Joined: Mon Oct 01, 2012 10:36 am
- Location: Ontario
Re: Wrenching Party !
I'd love to pull up and mess around, I'm not 100percent though for July 2.... I will be moving on the first ,
I guess if a landlord is behind on his mortgage , the bank tends to frown, and wants to foreclose .....
We already found a new place , in the Dundas valley, (with a garage I may add) hehe
Already have the leaking diff in mind, and it's not a hoist job,
Well had my radiator redone last week (warranty , even though over 2 1/2 years old , so that was great to hear,,,,
I guess if a landlord is behind on his mortgage , the bank tends to frown, and wants to foreclose .....
We already found a new place , in the Dundas valley, (with a garage I may add) hehe
Already have the leaking diff in mind, and it's not a hoist job,
Well had my radiator redone last week (warranty , even though over 2 1/2 years old , so that was great to hear,,,,
96 HMC4
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
- GreenMeanie
- CHC Pilot
- Posts: 426
- Joined: Tue Jul 22, 2008 3:28 am
Re: Wrenching Party !
I would be up for one or both those dates.
Don't really need anything done on my truck.
I do have 4 rear calipers i want to tear down for rebuild.
If you have the breggin tool for unscrewing the pistons,
that would certainly speed things up.
Don't really need anything done on my truck.
I do have 4 rear calipers i want to tear down for rebuild.
If you have the breggin tool for unscrewing the pistons,
that would certainly speed things up.
Early 1997 HMC4, 1 of 35, Original Block H296, 110,000 miles and no cracks yet, G10 green
Custom made Brush Gaurd, Roof Rack, Overhead Console and Sound System.
Custom made Brush Gaurd, Roof Rack, Overhead Console and Sound System.
- Toxicrider
- CHC Pilot
- Posts: 183
- Joined: Wed Apr 24, 2013 8:53 pm
- Location: Milton, On
Re: Wrenching Party !
I would be down on the 30th for sure! Even if I don't have anything to wrench on I always like to get together with you guys!!!
- Roy
- CHC Trail SuperGuide
- Posts: 1933
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Re: Wrenching Party !
[quote="GreenMeanie"]
I would be up for one or both those dates.
Don't really need anything done on my truck.
I do have 4 rear calipers i want to tear down for rebuild.
If you have the breggin tool for unscrewing the pistons,
that would certainly speed things up.
[/quote]
yes I have the unscrewing tool for the calipers.
I would be up for one or both those dates.
Don't really need anything done on my truck.
I do have 4 rear calipers i want to tear down for rebuild.
If you have the breggin tool for unscrewing the pistons,
that would certainly speed things up.
[/quote]
yes I have the unscrewing tool for the calipers.
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761
<p style="text-align:center;"> - Roy
- CHC Trail SuperGuide
- Posts: 1933
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Re: Wrenching Party !
So far ,2 possible people that have minor stuff to do.......If nothing else is booked, I will get my truck in for some touchups and cancel the event.
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761
<p style="text-align:center;"> - Boeing Jet
- CHC Trail SuperGuide
- Posts: 1425
- Joined: Wed Dec 30, 2009 9:48 am
- Location: Toronto
Re: Wrenching Party !
i am in for July 2-- it would be for brakes and steering. I got permission to come out.
Last edited by Boeing Jet on Sat Jul 02, 2016 7:09 am, edited 1 time in total.
- GreenMeanie
- CHC Pilot
- Posts: 426
- Joined: Tue Jul 22, 2008 3:28 am
Re: Wrenching Party !
Looks like i missed all the fun. I completely forgot about the event date and i have them both
on my calendar. I could have made it as well,,damn!! To busy flying my new drones.
Heard about the radius rod saga at street classics yesterday from Shotgun.
I will make the next one for sure.
on my calendar. I could have made it as well,,damn!! To busy flying my new drones.
Heard about the radius rod saga at street classics yesterday from Shotgun.
I will make the next one for sure.
Early 1997 HMC4, 1 of 35, Original Block H296, 110,000 miles and no cracks yet, G10 green
Custom made Brush Gaurd, Roof Rack, Overhead Console and Sound System.
Custom made Brush Gaurd, Roof Rack, Overhead Console and Sound System.
- Roy
- CHC Trail SuperGuide
- Posts: 1933
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Re: Wrenching Party !
July 30 wrenching....
So far I have only 1 for a visit, and 1 tentative....Any true interest of shop usage????
So far I have only 1 for a visit, and 1 tentative....Any true interest of shop usage????
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761
<p style="text-align:center;"> - Monk
- CHC Trail SuperGuide
- Posts: 1232
- Joined: Mon Oct 01, 2012 10:36 am
- Location: Ontario
Re: Wrenching Party !
I'm going for sure..(working on my dif leaks).. Be nice to meet some members....
Lol, we need few extra peeps,
This way we can get our Roy To BBq for the gang..
Hehe
Lol, we need few extra peeps,
This way we can get our Roy To BBq for the gang..
Hehe
Last edited by Monk on Sun Jul 24, 2016 7:12 pm, edited 1 time in total.
96 HMC4
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5