If anyone wants to learn about working on an H1 / humvee , every weekend I will be slowly rebuilding my 84.
There is :
sub frame member,
A frames,
springs,
spring frame mounts,
gas tank straps,
fuel lines,
brakes-complete...lines, caliper, e brake,
wiring,
body work,
exhaust,
oil leaks.
Some of the parts will be new, and some will be removed from my 96 parts truck
Please call in advance so I know you will be there.
Humvee Rebuild Workshop /Wrenching Party
- Roy
- CHC Trail SuperGuide
- Posts: 1933
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Humvee Rebuild Workshop /Wrenching Party
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761
<p style="text-align:center;"> - Roy
- CHC Trail SuperGuide
- Posts: 1933
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Re: Humvee Rebuild Workshop /Wrenching Party
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761
<p style="text-align:center;"> - Monk
- CHC Trail SuperGuide
- Posts: 1232
- Joined: Mon Oct 01, 2012 10:36 am
- Location: Ontario
Re: Humvee Rebuild Workshop /Wrenching Party
This weekend im busy, but I'd be down for getting dirty sometime , always a good time !!
96 HMC4
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
- Monk
- CHC Trail SuperGuide
- Posts: 1232
- Joined: Mon Oct 01, 2012 10:36 am
- Location: Ontario
Re: Humvee Rebuild Workshop /Wrenching Party
I got to see the victim to be done today, while I was getting a brake leak issue fixed
When done its gonna be a fun toy it looks like
When done its gonna be a fun toy it looks like
96 HMC4
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
Optimizer N/A
Super Swamper IROKS 39.5x13.5x 16.5
- Roy
- CHC Trail SuperGuide
- Posts: 1933
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Re: Humvee Rebuild Workshop /Wrenching Party
Well , after some thought, I think I will do a frame switch with my 96 parts truck.
This will save :
--a lot of ugle works taking the super rusty bolts off.
--time of replacing all 8 a frames, 4 spring, spring mounts, 2 sub frames...
I get to start from the ground and work up.
Start with geared hubs, springs,steering,brake lines, fuel lines, and some paint to make a rolling frame.
Next, the drive line, rad,fuel cell and finish the other lines.
... body change, electrical.......
This will save :
--a lot of ugle works taking the super rusty bolts off.
--time of replacing all 8 a frames, 4 spring, spring mounts, 2 sub frames...
I get to start from the ground and work up.
Start with geared hubs, springs,steering,brake lines, fuel lines, and some paint to make a rolling frame.
Next, the drive line, rad,fuel cell and finish the other lines.
... body change, electrical.......
Last edited by Roy on Wed Mar 29, 2017 8:26 pm, edited 1 time in total.
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761
<p style="text-align:center;">