Wrenching Party May 2017

Here is a great place to Post events in your Area!!
User avatar
Roy
CHC Trail SuperGuide
Posts: 1933
Joined: Tue Dec 29, 2009 8:21 pm
Location: Stratford,Ontario

Wrenching Party May 2017

Post by Roy »

What interest is there for a wrench party
either on your own , my trucks ,
or a demo rebuild
 
 
H1 parts availible at location.
H2 and H3 parts bring with you 
Tools,hoist,your labour,my knowledge---FREE
Maybe a BBQ lunch 
 
May 6th and or 13th  
8am till mid afternoon but no later than 5.
Rain or shine
                                      99 Wagon
                          5.9 Cummins 12 valve  mech.                                     Stocking most parts to fix your H1  :smil9:
                                   41.5-13.5 R16.5 Pitbull Rockers,
                                     Auburn lockers front and rear
                                  Full custom underbody protection
                                                3" body lift
                                          4" side rock tubes                                 
                               12100 rear cv shafts                                                                        
 
 
 
 
519-272-1761   :cellphone:
<p style="text-align:center;"> 
User avatar
Roy
CHC Trail SuperGuide
Posts: 1933
Joined: Tue Dec 29, 2009 8:21 pm
Location: Stratford,Ontario

Re: Wrenching Party May 2017

Post by Roy »

If interested give a general list of what is needed and what is to be done.

2 hoists are avilible if scheduled work requires their usage
                                      99 Wagon
                          5.9 Cummins 12 valve  mech.                                     Stocking most parts to fix your H1  :smil9:
                                   41.5-13.5 R16.5 Pitbull Rockers,
                                     Auburn lockers front and rear
                                  Full custom underbody protection
                                                3" body lift
                                          4" side rock tubes                                 
                               12100 rear cv shafts                                                                        
 
 
 
 
519-272-1761   :cellphone:
<p style="text-align:center;"> 
User avatar
Boeing Jet
CHC Trail SuperGuide
Posts: 1425
Joined: Wed Dec 30, 2009 9:48 am
Location: Toronto

Re: Wrenching Party May 2017

Post by Boeing Jet »

Ill be there May 6th usual time for Tranny issue.(so far) depending on Play offs
User avatar
Monk
CHC Trail SuperGuide
Posts: 1232
Joined: Mon Oct 01, 2012 10:36 am
Location: Ontario

Re: Wrenching Party May 2017

Post by Monk »

Always up for that, lol gotta see what I need....hehe
96 HMC4

Optimizer N/A

Super Swamper IROKS 39.5x13.5x 16.5
User avatar
Rocrusher
CHC Pilot
Posts: 107
Joined: Sun Mar 05, 2017 4:42 pm

Re: Wrenching Party May 2017

Post by Rocrusher »

If I can be apart of this I would love to! I am hoping my rig is not thumping! I would however love to rebuild my rear calipers if you have the seals in stock. Could always lend a hand to anyone as well. I would also have to check my schedule as sometimes it changes last minute.
 
Thanks 
User avatar
Roy
CHC Trail SuperGuide
Posts: 1933
Joined: Tue Dec 29, 2009 8:21 pm
Location: Stratford,Ontario

Re: Wrenching Party May 2017

Post by Roy »

As long as the bushing is not too rusted at the e brake side and the inner piston is not pitted. Have general rebuild kits
                                      99 Wagon
                          5.9 Cummins 12 valve  mech.                                     Stocking most parts to fix your H1  :smil9:
                                   41.5-13.5 R16.5 Pitbull Rockers,
                                     Auburn lockers front and rear
                                  Full custom underbody protection
                                                3" body lift
                                          4" side rock tubes                                 
                               12100 rear cv shafts                                                                        
 
 
 
 
519-272-1761   :cellphone:
<p style="text-align:center;"> 
User avatar
Rocrusher
CHC Pilot
Posts: 107
Joined: Sun Mar 05, 2017 4:42 pm

Re: Wrenching Party May 2017

Post by Rocrusher »

Nice. thanks.
User avatar
thejudge
CHC Navigator
Posts: 89
Joined: Fri Jul 13, 2012 11:12 am

Re: Wrenching Party May 2017

Post by thejudge »

I would be down for May 13. I want to change the rear leaf spring brackets for more ground clearance. I'll have the parts and the labour but lack the knowledge and the tools haha
User avatar
Roy
CHC Trail SuperGuide
Posts: 1933
Joined: Tue Dec 29, 2009 8:21 pm
Location: Stratford,Ontario

Re: Wrenching Party May 2017

Post by Roy »

Okay, it is on, both days,
 
Markus      --6th            trany diagnosis
Tito            --                 almost anything
Rocrusher --                 caliper rebuild  --possible checkover
Judge        --13th          rear spring brackets
Last edited by Roy on Wed May 03, 2017 2:31 pm, edited 1 time in total.
                                      99 Wagon
                          5.9 Cummins 12 valve  mech.                                     Stocking most parts to fix your H1  :smil9:
                                   41.5-13.5 R16.5 Pitbull Rockers,
                                     Auburn lockers front and rear
                                  Full custom underbody protection
                                                3" body lift
                                          4" side rock tubes                                 
                               12100 rear cv shafts                                                                        
 
 
 
 
519-272-1761   :cellphone:
<p style="text-align:center;"> 
User avatar
Rocrusher
CHC Pilot
Posts: 107
Joined: Sun Mar 05, 2017 4:42 pm

Re: Wrenching Party May 2017

Post by Rocrusher »

Sweet. can't wait!
Post Reply