Looking for a New Club Administer/President

A more general area for members only, like your local "spot" lets chat about truck stuff or anything that is bugging you or share something..
User avatar
Roy
CHC Trail SuperGuide
Posts: 1933
Joined: Tue Dec 29, 2009 8:21 pm
Location: Stratford,Ontario

Looking for a New Club Administer/President

Post by Roy »

Well, its been a few years since I took over the site and took care of all administration. Time to let somebody else take over. 
Reply here to apply. I can let you know all the costs to keep it running. I have a bunch of stickers and cards to ship to the new
administer. 
Thanks for the years , 
                                      99 Wagon
                          5.9 Cummins 12 valve  mech.                                     Stocking most parts to fix your H1  :smil9:
                                   41.5-13.5 R16.5 Pitbull Rockers,
                                     Auburn lockers front and rear
                                  Full custom underbody protection
                                                3" body lift
                                          4" side rock tubes                                 
                               12100 rear cv shafts                                                                        
 
 
 
 
519-272-1761   :cellphone:
<p style="text-align:center;"> 
User avatar
GreenMeanie
CHC Pilot
Posts: 426
Joined: Tue Jul 22, 2008 3:28 am

Re: Looking for a New Club Administer/President

Post by GreenMeanie »

Hey Roy, Email me the details at art.zone@bell.net
Not entirely sure about taking it on. I would need to think it through.
How are things going otherwise with the shop?
Early 1997 HMC4, 1 of 35, Original Block H296, 110,000 miles and no cracks yet, G10 green
Custom made Brush Gaurd, Roof Rack, Overhead Console and Sound System.
User avatar
Injunfarian
CHC President
Posts: 242
Joined: Sun Feb 21, 2010 12:11 pm
Location: Lambton Shores, ON
Contact:

Re: Looking for a New Club Administer/President

Post by Injunfarian »

Hey Roy,
 
Email me details as well cliff@etoolsmith.com
 
Although with my schedule etc I likely wouldn't make a great administrator for socializing(meets, greets, merchandise etc.) but I could definitely keep the Site/Forum running.
Cliff A
1998 AM General HMCO

Lambton Shores, ON.
www.eToolSmith.com
User avatar
Roy
CHC Trail SuperGuide
Posts: 1933
Joined: Tue Dec 29, 2009 8:21 pm
Location: Stratford,Ontario

Re: Looking for a New Club Administer/President

Post by Roy »

Notice to all:



We need to find somebody to take over the site. I have decided that it is time to have a new member run things. I will still advertize on this site but its time for me to step down.



Contact me or Marty for info.



Thankyou,

Roy
                                      99 Wagon
                          5.9 Cummins 12 valve  mech.                                     Stocking most parts to fix your H1  :smil9:
                                   41.5-13.5 R16.5 Pitbull Rockers,
                                     Auburn lockers front and rear
                                  Full custom underbody protection
                                                3" body lift
                                          4" side rock tubes                                 
                               12100 rear cv shafts                                                                        
 
 
 
 
519-272-1761   :cellphone:
<p style="text-align:center;"> 
User avatar
Injunfarian
CHC President
Posts: 242
Joined: Sun Feb 21, 2010 12:11 pm
Location: Lambton Shores, ON
Contact:

Re: Looking for a New Club Administer/President

Post by Injunfarian »

Email me details, definitely interested. cliff@etoolsmith.com
Cliff A
1998 AM General HMCO

Lambton Shores, ON.
www.eToolSmith.com
User avatar
Roy
CHC Trail SuperGuide
Posts: 1933
Joined: Tue Dec 29, 2009 8:21 pm
Location: Stratford,Ontario

Re: Looking for a New Club Administer/President

Post by Roy »

Well,still waiting to chat with Cliff.



I like to wish everyone a Merry Christmas and the best going into 2020.
                                      99 Wagon
                          5.9 Cummins 12 valve  mech.                                     Stocking most parts to fix your H1  :smil9:
                                   41.5-13.5 R16.5 Pitbull Rockers,
                                     Auburn lockers front and rear
                                  Full custom underbody protection
                                                3" body lift
                                          4" side rock tubes                                 
                               12100 rear cv shafts                                                                        
 
 
 
 
519-272-1761   :cellphone:
<p style="text-align:center;"> 
User avatar
Roy
CHC Trail SuperGuide
Posts: 1933
Joined: Tue Dec 29, 2009 8:21 pm
Location: Stratford,Ontario

Re: Looking for a New Club Administer/President

Post by Roy »

Welcome our new management. Cliff ,(Injunfarian). Taking over the reins and starting to run the site. Lets give him a round of handshakes.
                                      99 Wagon
                          5.9 Cummins 12 valve  mech.                                     Stocking most parts to fix your H1  :smil9:
                                   41.5-13.5 R16.5 Pitbull Rockers,
                                     Auburn lockers front and rear
                                  Full custom underbody protection
                                                3" body lift
                                          4" side rock tubes                                 
                               12100 rear cv shafts                                                                        
 
 
 
 
519-272-1761   :cellphone:
<p style="text-align:center;"> 
User avatar
Injunfarian
CHC President
Posts: 242
Joined: Sun Feb 21, 2010 12:11 pm
Location: Lambton Shores, ON
Contact:

Re: Looking for a New Club Administer/President

Post by Injunfarian »

Thank you, I am just migrating the site over to the new server as we speak... The only immediate change everyone will see is likely secure HTTPS/SSL connection.
 
I have also started an official CHC facebook group, please feel free to join:
https://www.facebook.com/groups/475932900006625/
 
Now I know there is an Ontario Hummer Group as well as a H1/HMMWV Hummer group on facebook but not a Canadian Wide Hummer group(for all Hummer models) which I believe this group will fill that void.
 
I do have some other ideas for the site/club down the road and will keep you all posted as they are close to being integrated, I am also interested to hear any ideas on what you would like to see on this site/club. 
Cliff A
1998 AM General HMCO

Lambton Shores, ON.
www.eToolSmith.com
User avatar
Archngel
CHC Trail SuperGuide
Posts: 1027
Joined: Sun Feb 07, 2010 5:55 pm
Location: Repentigny, Quebec

Re: Looking for a New Club Administer/President

Post by Archngel »

welcome aboard, 
 
as for the FB , ,i was under the impression that there was already one for the Canadian hummer club,, must have been mistaken,, i'm following on so many Hummer group or pages.
 
i tried to add a pic to the post Electric hummer,, but couldn't , ,must be because of the transition 
<p class="bbc_center">Wake up , it's off road time.

White 10 H3 Alpha, Black on White, Adventure, Toyo Open Country MT 315/75-16,

Front and Rear lockers, Under Body Armor, Rocker Protector, T-Max12000, Gobi Stealth Rack
<p class="bbc_center">White 08 H2 SUT Luxury on BF K02 AT 37x12.50R17 with Rancho 9000 serie
<p class="bbc_center">the rest is on the works
User avatar
Injunfarian
CHC President
Posts: 242
Joined: Sun Feb 21, 2010 12:11 pm
Location: Lambton Shores, ON
Contact:

Re: Looking for a New Club Administer/President

Post by Injunfarian »

Thank you, all has been transferred.
 
Please feel free to try to upload the image again, hopefully now that it is on the new server there will be no more issues but if there is please let me know and I will do my best to resolve ASAP.
Cliff A
1998 AM General HMCO

Lambton Shores, ON.
www.eToolSmith.com
Post Reply