Well figured I'd share my little build with everyone on here.
Here's the vehicle for starters
Here are the subs ( 4 TSNS 15s )
Here are the batts ( 10 Exide Group 31s )
Here is the sub amp ( AB 1100.1 )
Here is the amp for the mids ( 2 AB 350.4 )
MIDS ( 12 neodymium 8s )
HIGHS ( 6 PEAVEY Tweeters )
H2 THIRD ROW BUILD
- BRUTE
- CHC Pilot
- Posts: 107
- Joined: Thu Aug 12, 2010 6:12 pm
Re: H2 THIRD ROW BUILD
Starting the build of the enclosure.
- BRUTE
- CHC Pilot
- Posts: 107
- Joined: Thu Aug 12, 2010 6:12 pm
Re: H2 THIRD ROW BUILD
Getting the bracing ready
- dwaxman1
- CHC Trail Guide
- Posts: 957
- Joined: Wed Dec 09, 2009 6:20 pm
- Location: , Ontario
Re: H2 THIRD ROW BUILD
wow.. I am interested to see more.........
<!-- isHtml:1 --><!-- isHtml:1 -->
- BRUTE
- CHC Pilot
- Posts: 107
- Joined: Thu Aug 12, 2010 6:12 pm
Re: H2 THIRD ROW BUILD
Front Baffle completed ( triple 1" )
BATTERY RACK
Test fitting first row of batts
Piecing together battery rack
Rack welded and completed (first row of batts only)
BATTERY RACK
Test fitting first row of batts
Piecing together battery rack
Rack welded and completed (first row of batts only)
- BRUTE
- CHC Pilot
- Posts: 107
- Joined: Thu Aug 12, 2010 6:12 pm
Re: H2 THIRD ROW BUILD
Test fitting amplifiers
- BRUTE
- CHC Pilot
- Posts: 107
- Joined: Thu Aug 12, 2010 6:12 pm
Re: H2 THIRD ROW BUILD
The Port
TRIM PANEL ( front wall baffle )
Mounting the SUBS ( what a F$CKING PAIN....85lb+ each sub )
TRIM PANEL ( front wall baffle )
Mounting the SUBS ( what a F$CKING PAIN....85lb+ each sub )
- BRUTE
- CHC Pilot
- Posts: 107
- Joined: Thu Aug 12, 2010 6:12 pm
Re: H2 THIRD ROW BUILD
Now on to the DOORS
IMPORTANT NOTE.....doors are not finished yet. they still need to be cleaned up a bit around the corners and then wrapped in vinyl. Also insert covers are being made for cosmetic and protection purposes as well....
Doors have since been wrapped and finished..will post updated pics shortly
IMPORTANT NOTE.....doors are not finished yet. they still need to be cleaned up a bit around the corners and then wrapped in vinyl. Also insert covers are being made for cosmetic and protection purposes as well....
Doors have since been wrapped and finished..will post updated pics shortly
- BRUTE
- CHC Pilot
- Posts: 107
- Joined: Thu Aug 12, 2010 6:12 pm
Re: H2 THIRD ROW BUILD
Hope you enjoyed the INITIAL build <img src='http://www.canadianhummerclub.com/forum ... rgreen.gif' class='bbc_emoticon' alt=':mrgreen:' />
Now for an UPDATE......
Going to be changing things up.
Doors staying the same
Enclosure staying the same
NEW front baffle with subwoofer set up.
New AMPLIFIERS
New Batteries
Stay Tuned !
Now for an UPDATE......
Going to be changing things up.
Doors staying the same
Enclosure staying the same
NEW front baffle with subwoofer set up.
New AMPLIFIERS
New Batteries
Stay Tuned !