High Powered LED Projection headlights

Chrome and flash more your style? You rolling on 24”s or larger? You shine you ride regularly? Then this is the place!
Post Reply
User avatar
chrisbernard
Club Member
Posts: 1
Joined: Tue Nov 04, 2014 6:24 pm

High Powered LED Projection headlights

Post by chrisbernard »

LED.jpg
I do custom installs.
 
If you are looking for high powered LED projection headlights or driving lights, please contact me.   thinair@shaw.ca
You do not have the required permissions to view the files attached to this post.
User avatar
whitehumh2
CHC Trail SuperGuide
Posts: 4529
Joined: Tue Jul 04, 2006 11:47 pm
Location: Lachine, Quebec

Re: High Powered LED Projection headlights

Post by whitehumh2 »

Would you be able to post some comparison photos of the Stock vs the LEDs vs some HIDs?

That would be very helpful!

Thanks,

Kev
<p class="bbc_center">1 - There is a time for everything,

and a season for every activity under the heavens:

3b - a time to tear down and a time to build,

5 - a time to scatter stones and a time to gather them,

Ecclesiastes 3:1,3b&5a
User avatar
Big_Dub
CHC Pilot
Posts: 131
Joined: Mon Mar 15, 2010 1:47 pm

Re: High Powered LED Projection headlights

Post by Big_Dub »

Good First post....An Ad for your business..........
User avatar
shotgun-cam
CHC Trail SuperGuide
Posts: 2037
Joined: Sun Jan 24, 2010 2:09 pm

Re: High Powered LED Projection headlights

Post by shotgun-cam »

Rhino now has h13 led bulbs in. They cost about the same as the lumens hid's and give similar light without all the additional wiring.
 
 LED The normal lighting harness plugs directly into small "ballast" boxes less than 1/4 the ballasts of hid's, 2 plugs go to the each of the bulbs and fan units that screw on to the bulbs which fit in as normal bulbs and done. (FreeThrottle system)
 
Hids use a switcher box which takes power from battery (additional fuse) and 1 stock lamp plug. (2nd stock plug on passenger side has to be sealed off) a cable then runs across front to ballast on passenger side and both balasts attach with two plugs to lamps. and also 1 or 2 grounds must be established for cabling wires. Note on Rhino the hid's failed to light at times like when starting or steping down to daylight or drivers side we tried 5 sets of bulbs and two compleat sets of hid kits both had same problem additionally the bulbs were incompatable between the kits  WE DO NOT RECOMEND HID SYSTEMS for these reasons .
Last edited by shotgun-cam on Wed Nov 19, 2014 5:27 pm, edited 1 time in total.
Enjoy Life and Leave the World a Little Better Each Day!!
User avatar
Big_Dub
CHC Pilot
Posts: 131
Joined: Mon Mar 15, 2010 1:47 pm

Re: High Powered LED Projection headlights

Post by Big_Dub »

For anyone interested in the OP's content here is a link for similar look lamps.
 
<a href="http://www.ebay.com/itm/JW-Speaker-8700 ... wt_1273</a>
User avatar
Sugarphreak
CHC Pilot
Posts: 329
Joined: Mon Feb 08, 2010 6:05 pm

Re: High Powered LED Projection headlights

Post by Sugarphreak »

[quote="Big_Dub"]
Good First post....An Ad for your business..........
[/quote]
 
:coffeespit:
 
 
To be fair, I did a quick facebook stalk on the user name. He isn't in the headlamp installation business, he is a photog.
 
If I had to guess he owns the H2 and he wants to sell these.
 
<a href="https://www.facebook.com/photo.php?fbid ... 4335755</a>
 
 
EDIT: Never mind, according to his post he is installing them for a  customer
Last edited by Sugarphreak on Thu Nov 27, 2014 11:56 pm, edited 1 time in total.
User avatar
Big_Dub
CHC Pilot
Posts: 131
Joined: Mon Mar 15, 2010 1:47 pm

Re: High Powered LED Projection headlights

Post by Big_Dub »

Good To Know that if he wasn't a photographer he would have a custom fab shop......because installing direct bolt in replacment LED lamps is custom Fab :rotflmao:
Last edited by Big_Dub on Fri Nov 28, 2014 3:48 pm, edited 1 time in total.
User avatar
shotgun-cam
CHC Trail SuperGuide
Posts: 2037
Joined: Sun Jan 24, 2010 2:09 pm

Re: High Powered LED Projection headlights

Post by shotgun-cam »

Rhino is now fully Led lit at front end save the H3 bulbs in ARB foglights and the foreward facing OEM turn/clearance lights sides are set of bulbs from A1 components and are brighter than the originals.  
Enjoy Life and Leave the World a Little Better Each Day!!
Post Reply