alarm system and remote start
- AaronFinney
- Club Member
- Posts: 1
- Joined: Mon Jan 27, 2014 1:54 pm
alarm system and remote start
The doors lock and unlock fine. All lights come on and the thing beeps and churps. My problem is when I hit the remote starter. It starts but only runs for a few seconds and cuts off. Now if I do it with the key it runs and stay running. Wth is going on .
- Kapman
- Club Member
- Posts: 44
- Joined: Wed Jul 03, 2013 3:22 pm
- Location: Maple Ridge, BC
Re: alarm system and remote start
1. Push button.
2. Starter runs.
3. Engine starts.
4. Starter disengages.
5. Idles normally for a few seconds.
6. Engine shuts off.
If this is the correct sequence you are experiencing then I would check the oil pressure sender circuit.
# 4 and 5 are key to this.
2. Starter runs.
3. Engine starts.
4. Starter disengages.
5. Idles normally for a few seconds.
6. Engine shuts off.
If this is the correct sequence you are experiencing then I would check the oil pressure sender circuit.
# 4 and 5 are key to this.
- dwaxman1
- CHC Trail Guide
- Posts: 957
- Joined: Wed Dec 09, 2009 6:20 pm
- Location: , Ontario
Re: alarm system and remote start
what system do you have installed?
<!-- isHtml:1 --><!-- isHtml:1 -->