I made up some alignment washers for my 12 bolt rims last night and I am having second thoughts on weather to use them or not. I'm a bit of a perfectionist and made them to very precise tolerances. I'm worried that they will cause too much stress on the bolts. All the wheel components still side together nicely (no forcing them during assembly).
Just looking for input from other knolagable individuals.
Need advice about two piece steel wheels.
-
Kapman
- Club Member
- Posts: 44
- Joined: Wed Jul 03, 2013 3:22 pm
- Location: Maple Ridge, BC
Need advice about two piece steel wheels.
You do not have the required permissions to view the files attached to this post.
-
whitehumh2
- CHC Trail SuperGuide
- Posts: 4529
- Joined: Tue Jul 04, 2006 11:47 pm
- Location: Lachine, Quebec
Re: Need advice about two piece steel wheels.
Well, I can still see the lathe marks so I think you need to run another pass on the lathe....Just Joking!!!
They look great!
They look great!
<p class="bbc_center">1 - There is a time for everything,
and a season for every activity under the heavens:
3b - a time to tear down and a time to build,
5 - a time to scatter stones and a time to gather them,
Ecclesiastes 3:1,3b&5a
and a season for every activity under the heavens:
3b - a time to tear down and a time to build,
5 - a time to scatter stones and a time to gather them,
Ecclesiastes 3:1,3b&5a
-
Roy
- CHC Trail SuperGuide
- Posts: 1926
- Joined: Tue Dec 29, 2009 8:21 pm
- Location: Stratford,Ontario
Re: Need advice about two piece steel wheels.
OEM are just pressed out, yes they are close but not prefect. I have them in stock but they are pricey. Your design will be less costly than buying OEM.
Cut back on the lead in chamfer, and rough bore for the bolt, do not need it too tight as there should be say 15-20 thou clearance.
Cut back on the lead in chamfer, and rough bore for the bolt, do not need it too tight as there should be say 15-20 thou clearance.
99 Wagon
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
5.9 Cummins 12 valve mech. Stocking most parts to fix your H1
41.5-13.5 R16.5 Pitbull Rockers,
Auburn lockers front and rear
Full custom underbody protection
3" body lift
4" side rock tubes
12100 rear cv shafts
519-272-1761 
<p style="text-align:center;">