High Powered LED Projection headlights
- chrisbernard
- Club Member
- Posts: 1
- Joined: Tue Nov 04, 2014 6:24 pm
High Powered LED Projection headlights
If you are looking for high powered LED projection headlights or driving lights, please contact me. thinair@shaw.ca
You do not have the required permissions to view the files attached to this post.
- whitehumh2
- CHC Trail SuperGuide
- Posts: 4529
- Joined: Tue Jul 04, 2006 11:47 pm
- Location: Lachine, Quebec
Re: High Powered LED Projection headlights
Would you be able to post some comparison photos of the Stock vs the LEDs vs some HIDs?
That would be very helpful!
Thanks,
Kev
That would be very helpful!
Thanks,
Kev
<p class="bbc_center">1 - There is a time for everything,
and a season for every activity under the heavens:
3b - a time to tear down and a time to build,
5 - a time to scatter stones and a time to gather them,
Ecclesiastes 3:1,3b&5a
and a season for every activity under the heavens:
3b - a time to tear down and a time to build,
5 - a time to scatter stones and a time to gather them,
Ecclesiastes 3:1,3b&5a
- Big_Dub
- CHC Pilot
- Posts: 131
- Joined: Mon Mar 15, 2010 1:47 pm
Re: High Powered LED Projection headlights
Good First post....An Ad for your business..........
- shotgun-cam
- CHC Trail SuperGuide
- Posts: 2037
- Joined: Sun Jan 24, 2010 2:09 pm
Re: High Powered LED Projection headlights
Rhino now has h13 led bulbs in. They cost about the same as the lumens hid's and give similar light without all the additional wiring.
LED The normal lighting harness plugs directly into small "ballast" boxes less than 1/4 the ballasts of hid's, 2 plugs go to the each of the bulbs and fan units that screw on to the bulbs which fit in as normal bulbs and done. (FreeThrottle system)
Hids use a switcher box which takes power from battery (additional fuse) and 1 stock lamp plug. (2nd stock plug on passenger side has to be sealed off) a cable then runs across front to ballast on passenger side and both balasts attach with two plugs to lamps. and also 1 or 2 grounds must be established for cabling wires. Note on Rhino the hid's failed to light at times like when starting or steping down to daylight or drivers side we tried 5 sets of bulbs and two compleat sets of hid kits both had same problem additionally the bulbs were incompatable between the kits WE DO NOT RECOMEND HID SYSTEMS for these reasons .
LED The normal lighting harness plugs directly into small "ballast" boxes less than 1/4 the ballasts of hid's, 2 plugs go to the each of the bulbs and fan units that screw on to the bulbs which fit in as normal bulbs and done. (FreeThrottle system)
Hids use a switcher box which takes power from battery (additional fuse) and 1 stock lamp plug. (2nd stock plug on passenger side has to be sealed off) a cable then runs across front to ballast on passenger side and both balasts attach with two plugs to lamps. and also 1 or 2 grounds must be established for cabling wires. Note on Rhino the hid's failed to light at times like when starting or steping down to daylight or drivers side we tried 5 sets of bulbs and two compleat sets of hid kits both had same problem additionally the bulbs were incompatable between the kits WE DO NOT RECOMEND HID SYSTEMS for these reasons .
Last edited by shotgun-cam on Wed Nov 19, 2014 5:27 pm, edited 1 time in total.
Enjoy Life and Leave the World a Little Better Each Day!!
- Big_Dub
- CHC Pilot
- Posts: 131
- Joined: Mon Mar 15, 2010 1:47 pm
Re: High Powered LED Projection headlights
For anyone interested in the OP's content here is a link for similar look lamps.
<a href="http://www.ebay.com/itm/JW-Speaker-8700 ... wt_1273</a>
<a href="http://www.ebay.com/itm/JW-Speaker-8700 ... wt_1273</a>
- Sugarphreak
- CHC Pilot
- Posts: 329
- Joined: Mon Feb 08, 2010 6:05 pm
Re: High Powered LED Projection headlights
[quote="Big_Dub"]
Good First post....An Ad for your business..........
[/quote]
To be fair, I did a quick facebook stalk on the user name. He isn't in the headlamp installation business, he is a photog.
If I had to guess he owns the H2 and he wants to sell these.
<a href="https://www.facebook.com/photo.php?fbid ... 4335755</a>
EDIT: Never mind, according to his post he is installing them for a customer
Good First post....An Ad for your business..........
[/quote]
To be fair, I did a quick facebook stalk on the user name. He isn't in the headlamp installation business, he is a photog.
If I had to guess he owns the H2 and he wants to sell these.
<a href="https://www.facebook.com/photo.php?fbid ... 4335755</a>
EDIT: Never mind, according to his post he is installing them for a customer
Last edited by Sugarphreak on Thu Nov 27, 2014 11:56 pm, edited 1 time in total.
- Big_Dub
- CHC Pilot
- Posts: 131
- Joined: Mon Mar 15, 2010 1:47 pm
Re: High Powered LED Projection headlights
Good To Know that if he wasn't a photographer he would have a custom fab shop......because installing direct bolt in replacment LED lamps is custom Fab
Last edited by Big_Dub on Fri Nov 28, 2014 3:48 pm, edited 1 time in total.
- shotgun-cam
- CHC Trail SuperGuide
- Posts: 2037
- Joined: Sun Jan 24, 2010 2:09 pm
Re: High Powered LED Projection headlights
Rhino is now fully Led lit at front end save the H3 bulbs in ARB foglights and the foreward facing OEM turn/clearance lights sides are set of bulbs from A1 components and are brighter than the originals.
Enjoy Life and Leave the World a Little Better Each Day!!